Barite Powder Grinding Air Jet Mill Machine for 2-45microns Ultrafine Grinding

Barite Powder Grinding Air Jet Mill Machine for 2-45microns Ultrafine Grinding

ALPA-Air Jet Mill Features:

Click here to get more information about Jet Mill.

Barite Powder Application:

Barite powder, also known as barium sulfate powder BaSO4, is a sulfate mineral of orthorhombic (orthogonal) crystal system. Barite is a very important non-metallic mineral raw material and has a wide range of industrial uses.

1.As a weighting agent of drilling mud: In the case of high underground pressure, it is necessary to increase the specific gravity of the mud. Adding barite powder to the mud is an effective measure to increase the specific gravity of the mud. Generally, the fineness of barite used as drilling mud should reach 325 mesh or more. If the fineness of barite is not enough, precipitation is likely to occur. Barite for drilling mud requires a specific gravity greater than 4.2, BaSO4 content not less than 95%, and soluble salts less than 1%.

2.Lithopone pigment: Lithopone is a commonly used high-quality white pigment that can be used as a raw material for paints and painting pigments.

ALPA-Air Jet Mill Working Principle:

Fluidized(Fluidised) bed opposed jet mill works with cyclone separator, dust collector and suction fan to form a complete grinding system.Compressed air flow after filtration and drying would go into milling chamber from nozzles, and meet in the center area, where material would be impacted and ground and sheared.

Milled powder would go up to the classifying chamber by the air flow from suction fan. The high-speed rotation of classifier wheel would create a strong centrifugal force to separate coarse powder and fine powder.Qualified fine powder would go through the wheel vane then into the cyclone separator or dust collector, while mixture of coarse powder and fine powder would fall down to the milling chamber to be milled again.

Philippines a high-tech enterprise, lithium carbonate powder, annual output 10000T, particle size D50:5μm, Jet Mill Production Line

More About ALPA:

Shandong ALPA Powder Technology Co., Ltd.