Contact Platform Support
Help CenterUCP206 2 Bolts Metric Pillow Block Bearing 30mm Cast Iron SUNBEARING
Related Products
-
UCP208 40mm Pillow Block Housing Unit Bearing Cast Iron SUNBEARINGUS$ 22.02 - 30MOQ: 1 Piece -
SUCF206 4 Bolts Stainless Steel Flange Bearing With Insert Ball Bearing SUNBEARINGUS$ 8.43 - 10MOQ: 1 Piece
-
UCFL204 2 Bolts Flange Housed Bearing Unit 20mm SUNBEARINGUS$ 1.8 - 5MOQ: 1 Piece
-
UCFL206 2 Hole Flange Bearing Unit 30mm ID SUNBEARINGUS$ 2.71 - 5MOQ: 1 Piece
-
UCTH207-230 Bearing Unit With Frame SUNBEARINGUS$ 12.5 - 15MOQ: 1 Piece
| Product Name | Pillow Block Bearing UCP206 | ||
| Structure | Pillow block Bearing | Limiting speed Bearing with shaft tolerance h6 | 5000 r/min |
| Bore Size | 30 mm | Housing material | Cast iron |
| L | 165mm | Set screw | M6x0.75 |
| H2 | 83 mm | Hexagonal key size for set screw | 3 mm |
| Designation, housing | P206 | Recommended tightening torque for set screw | 4 N·m |
| The Designation, Radial Insert Ball Bearing | UC206 | Recommended diameter for attachment bolts, mm | 16 mm |
| Bearing Type | Extended inner race with set screws | Rotational Speed [Max] | 4900 RPM |
| A | 45 mm | Operating Temperature Range |
-40 to 250 ºF -40 to 120 ºC |
| Product weight: | 1,29 kg | Lubrication | Non-Relubricatable |
| Material | Cast iron housing, chrome steel bearing | Mounting Hole Center-to-Center (e) | 48 mm |
| Dynamic Load Rating (Cr) | 19.5 kN | Mounting Slot Length (S2) | 21 mm |
| Static Load Rating (Cor) | 11.2 kN | Mounting Slot Width (S1) | 17 mm |
| Fatigue load limit | 0.475 kN | Housing Base Thickness (g) | 15 mm |
UCP206 30mm Pillow Block Bearing
The UCP206 bearing is dimensionally interchangeable with other brands bearing such as Asahi / FYH and NTN.
The new radial insert ball bearing and housing units give easy mounting, smooth running and high reliability and thus allow particularly economical bearing arrangements.
The dimensions of the UCP housings, made from flake graphite cast iron and with a primer paint coating, conform to JIS B 1559 (Japanese Industrial Standard Dimensions).
These single piece cast housings can support moderate to high radial and axial loads. The radial insert ball bearings have basic protection against corrosion due to the Durotect BS coating.
The bearing units are particularly suitable for applications with moderate to high loads.
In order to distinguish whether the removed bearing can be used from the beginning, the standard accuracy, rotation accuracy, internal clearance and wear of the cooperation surface, raceway surface, retainer and seal ring should be checked.
Regarding the inspection effect, it can be distinguished and judged by conventional bearings or users who know the reasonable bearings. In addition, the inspection cycle and inspection parameters can be different according to the use of the mechanical function and the importance of related factors. If the above damages cannot meet the requirements for reuse, the pillow block bearings must not be used from the beginning and need to be replaced.
Send Inquiry to This Supplier
You May Also Like
-
Factory Pillow Block Bearing UCFL206 With Rubber SealsNegotiableMOQ: 1 Millimeter
-
SN309 Plummer Block Bearing Housing Without Bearing UnitNegotiableMOQ: 1 Millimeter
-
Plummer Block Bearing Pressed Steel Bearing Housing SN516NegotiableMOQ: 1 Millimeter
-
UCP307 Bearing Holder Pillow Block BearingNegotiableMOQ: 1 Millimeter
-
30mm Bore UC Pillow Block Bearing Housing Bearing UCPA206NegotiableMOQ: 1 Millimeter
-
Pillow Block Bearing UCP211 Cast Iron Casting Bearing HousingNegotiableMOQ: 1 Millimeter
-
Pillow Block Bearing UCP206 Use Of Pedestal Bearing With Plummer Block HousingNegotiableMOQ: 1 Millimeter
-
UCP210 Pillow Block Bearing Cast IronNegotiableMOQ: 1 Millimeter
-
Pillow Block Bearing UCP209 Pillow Block Bearing Sizes ChartNegotiableMOQ: 1 Millimeter
-
SUNBEARING UCP208 -210 All Type Of Bearing Pillow Block BearingNegotiableMOQ: 1 Millimeter
