Stainless Steel Actuator double acting weld pneumatic angle seat valve

Stainless Steel Actuator double acting weld pneumatic angle seat valve

The summarize of the welded pneumatic angle seat valve

The pneumatic seat valve: With 316 stainless steel as the main manufacturing materials. it is widely used in beer, textile printing and dyeing and bleach, pharmacy and medical equipment, food processing, rubber machinery, organic and inorganic chemicals, cleaning and disinfection of the high temperature sterilization, water treatment and other industries, suitable for medium of water, liquid, gas, steam, mild corrosive gas and liquid, and compared with solenoid valve and other valves, it is characterized by the economical investment, the use of safe, no maintenance, long life characteristics.
Specification:
*Long service life, economical investment.
*Compact in size and lightweight.
*Convenient of maintenance, replacement and disassemble.
*Used in food, medicine, textile printing and dyeing etc.

  Specification 

Max pressure :             1.6 Mpa(232psi)                     

 pressure :                    0.3~0.8 Mpa (43.5-116psi)                            

Material :                      CF8M / CF8

Seal :                            PTFE

Actuator material :         CF8

Actuator size :               40mm, 50mm, 63mm, 90mm, 125mm

Applicable Fluid :          water, alcohol, oil, fuel, steam, neutral gas or liquid,                                                                         organic solvent, acid and lye

Max fluid viscosity  :     600mm²/s

Fluid temperature :       -10°c~180°c , 25°c~220°c

Ambient temperature :  -10°c~80°c

Control type :                 Normally open, Normally closed single acting/double  acting , 
                                                  Double acting

Connection  :                 Threaded (BSP, BSPT, NPT), Welded, Flanged, Tri-clamp                                   

Dimensions 

1    Lndication rod (nylon)           9   Piston seal (FKM)

2   Actuator (CF8)                         10  Seal spring (AISI 304) 

3  PILOT PORT (1/8")                   11  Connecting piece (CF8M/ CF8)

4   Stem (AISI316/ 304)                12  Body seal (PTFE)

5   Stem seal (PTFE)                   13  Valve core (VF8M/ CF8)

6   Cap (PC)                               14  Seat (PTFE)

7   Spring (steel 65Mn)                15  Gasket (AISI316/ 304)

8   Piston (Alu.alloy)                   16  Body (CF8M/ CF8)

Image