CX Two Modulars Pneumatic Friction Brake DBK20.2
CX two modulars pneumatic friction brake DBK20.2
DBK250 model combiflex pneumatic friction brake is a caliper disc brake with fan. It is consist of some pieces of DBK10 or DBK20 together. It is good for heat dissipation, and the turbine disc design can reduce heat during rotating, so as to prolong braking pads and brake usage life span. For this DBK20.2 brake, it is composed of two modulars brake together.
DBK20.2 is two of braking modulars of combiflex fan cooled pneumatic brake, it can be replaced independently and easily if friction pads worn. Its caliper disc brake, friction lining clamp braking disc after supplying air pressure, brake released after exhausting air pressure.
Following is the structure and technical data of this modular brake:
DBK10 and DBK20 are both friction caliper disc brake, so they are used to clamp steel plate for stopping. Their installation is very easy, fixed four installation holes via screws on the workplate is done. They are suitable for braking steel disk diameter is more than 250mm, it is the same with integrated structure DBK250.
Send Inquiry to This Supplier
You May Also Like
-
BST Pneumatic Actuated Hydraulic Amplifier for Oil Pump UsageUS$ 200 - 300MOQ: 1 Set
-
Transform Air Pressure to Oil Pressure Pneumatic BoosterUS$ 200 - 300MOQ: 1 Set
-
BST Hydraulic Booster With Air Cylinder HeadUS$ 200 - 300MOQ: 1 Set
-
DBM Hydraulic Caliper Disc Brake for Wet Situation UsageUS$ 200 - 300MOQ: 1 Set
-
Hydraulic Caliper Disc Brake Cooperated With BST Air Oil TransformerUS$ 200 - 300MOQ: 1 Set
-
DOT3 and DOT4 Braking Oil Hydraulic Brake for CraneUS$ 200 - 300MOQ: 1 Set
-
DBM Hydraulic Clamp Brake Takes Oil as Braking SourceUS$ 200 - 300MOQ: 1 Set
-
NE DBM Hydraulic Caliper Disc Brake for Construction MachineUS$ 200 - 300MOQ: 1 Set
-
Superior Quality DBM10 Friction Brake With Hydraulic OilUS$ 200 - 300MOQ: 1 Set
-
Factory Supply DBM20 Caliper Disc Brake With Hydraulic OilUS$ 200 - 300MOQ: 1 Set

