Low PIM 1 Meter 1/2″ Super Flexible RF Jumper Cable With N Male to N Male Connector

1.1 Connector Materials and Plating | |
Inner conductor: |
Bronze, plated with silver,plating thickness ≥0.003mm |
Outer conductor: |
Brass, plated with ternary alloy,plating thickness≥0.002mm |
Fastener: Brass: |
Insulation |
dielectric: |
PTFE |
1.2 Electrical & Mechanic Feature | |
Characteristics impedance: |
50Ω |
Frequency range: |
DC-3GHz |
VSWR: |
≤1.15 (DC-3GHz) |
Dielectric strength: |
≥2500V |
Contact resistance: |
inner conductor≤1.0mΩ, Outer conductor≤0.4mΩ |
Insulator resistance: |
≥5000MΩ (500V DC) |
VSWR: |
≤1.15 (DC-3GHz) |
PIM(IM3): |
≤-155dBc@2x43dBm |
Connector durability: |
≥500 cycles |
2.1 Materials | |
Inner conductor: |
aluminum wire covered with copper (φ3.60mm) |
Insulation dielectric: |
polyethylene foam (φ8.90mm) |
Outer conductor: |
corrugated copper tube (φ12.20mm) |
Cable jacket: |
PE (φ13.60mm) |
2.2 Feature | |
Characteristics impedance: |
50Ω |
Standard capacitor: |
80pF/m |
Transmission rate: |
83% |
Min. single bending radius: |
50mm |
Tensile strength: |
700N |
Insulation resistance: |
≥5000MΩ |
Shielding attenuation: |
≥120dB |
VSWR: |
≤1.15 (0.01-3GHz) |
3. Jumper cable
3.1 Cable Component Size |
|
Total length of cable assemblies: |
1000mm±10, 2000mm±20, 3000mm±25,5000mm±40 |
3.2 Electrical feature | |
Frequency Band: |
800-2700MHz |
Characteristics Impedance: |
50Ω±2 |
Operating Voltage: |
1500V |
VSWR: |
≤1.11 (0.8-2.2GHz), ≤1.18 (2.2-2.7GHz) |
Insulation voltage: |
≥2500V |
Insulation resistance: |
≥5000MΩ (500V DC) |
PIM(IM3): |
≤-155dBc@2x20W |
3.3 Insertion Loss:
Frequency |
1m |
2m |
3m |
5m |
890-960MHz |
≤0.15dB |
≤0.26dB |
≤0.36dB |
≤0.54dB |
1710-1880MHz |
≤0.20dB |
≤0.36dB |
≤0.52dB |
≤0.80dB |
1920-2200MHz |
≤0.26dB |
≤0.42dB |
≤0.58dB |
≤0.92dB |
2500-2690MHz |
≤0.30dB |
≤0.50dB |
≤0.70dB |
≤1.02dB |
5800-5900MHz |
≤0.32dB |
≤0.64dB |
≤0.96dB |
≤1.6dB |
Mechanical Shock Test Method: MIL-STD-202, Method 213, Test Condition I
Moisture Resistance Test Method: MIL-STD-202F, Method 106F
Thermal Shock Test Method: MIL-STD-202F, Method 107G, Test Condition A-1
3.3 Environment feature |
|
Waterproof: |
IP68 |
Operation temperature range: |
-40℃ to +85℃ |
Storage temperature range: |
-70℃ to +85℃ |
Send Inquiry to This Supplier
You May Also Like
-
Hansen 50ohm RF 50 7/8'' Coaxial Feeder Cable RF 5078 Coaxial Shielded Cable for TransmissionUS$ 1 - 2MOQ: 2000 Meters
-
Hansen 50ohm RF 50 1/2'' Regular Standard Coaxial Feeder CableUS$ 1 - 2MOQ: 2000 Meters
-
DIN Male to Male for 12 Superflex Cable Assembly Jumper CableUS$ 1 - 2MOQ: 200 Meters
-
Low Loss 7/8 RF Coaxial Feeder Cable SupplierUS$ 1 - 2MOQ: 2000 Meters
-
2 Meter Jumper Cable 1/2″ Superflex With 7/16 Male DIN ConnectorUS$ 1 - 2MOQ: 200 Meters
-
Optic Fiber Clamp for Fiber Cable, Power Cable, Double Type 6 HolesUS$ 0.5 - 1MOQ: 500 Pieces
-
Fiber Optic Clamp for Fiber Cable, Power Cable, Double Type, 6 HolesUS$ 0.5 - 1MOQ: 500 Pieces
-
Optic Fiber Clamp for Optic Cable and Power Cable, Double Type, 6 HolesUS$ 0.5 - 1MOQ: 500 Pieces
-
Fiber Cable Clamp for 5-6mm and 20-22mm Cable, Double TypeUS$ 0.5 - 1MOQ: 500 Pieces
-
Fiber Cable Clamp for 5mm Fiber Cable, 4 Holes, Double TypeUS$ 0.5 - 1MOQ: 500 Pieces