Contact Platform Support
Help CenterConduit Bending Testing Machine/Solar Panel Testing Machine/PV Module Testing Machine With IEC61730
Related Products
-
IEC61215-2 Solar Panel PV Module Cord Anchorage Pull Testing Machine /pv Module Testing EquipmentUS$ 3,000 - 4,000MOQ: 1 Set -
Cord Anchorage Pull Testing Machine/tension Testing Equipment /thrust Testing Apparatus for Solar PanelUS$ 3,000 - 4,000MOQ: 1 Set
-
PV Module Hail Pound Testing Machine/testing Apparatus/testing EquipmentUS$ 26,000 - 27,000MOQ: 1 Set
-
Environment Humidity Freeze Testing Chamber/low Temperature Testing Chamber for Solar Panel TestingUS$ 23,000 - 80,000MOQ: 1 Set
-
Solar Panel Hail Impact Machine/PV Module Impigement Testing Machine/lash Testing Equipment With IEC61215-2:2016 StandardUS$ 0.01 - 1MOQ: 1 Set
Conduit Bending Testing Machine/Solar panel testing machine/PV Module Testing Machine with IEC61730
Testing standard
It's conform IEC61730 testing standard
Purpose
The modules provided with junction boxes intended for attachment of a permanent wiring system using conduit must provide assurance of the ability of the box construction to withstand load forces which may be applied to the conduit during and after installtion
The Main Technical Specifications
Testing stand frame Struction frame raw materials |
Steel channel ( Firm and Antirust) |
| Controller set frequency range | 0-120HZ |
| When set the frequency is 60HZ, principal axis revolution | 1 rev./min |
| Principal axis revolution | N rev./min=frequency HZ/60 |
| Timing range | 1~9999s |
| Electricity | 1 phase AC 220V 50HZ |
| Power | 100W |
Testing procedure
1.Two 460mm lengths of proper trade size conduit with appropriate fitting for the box shall be assembled and installed onto the box on opposing surfafces. For boxes intended for use with non-metallic conduit, the conduit test lengths are to be to welded to the fittings and allowed to dry no less than 24h prior to assembly
1. The test assembly, with the box at the centre ,the supports are to be separated by a distance of 760mm plus the distance between the ends of the conduit in the box, to give the required bending moment on the sample under test
3.The load specified size of conduit , is to be suspended from the centre of the box for 60s, during this time, the box and the lengths of conduit shall be rotated through one complete revolution about the major axis of the assembly.
Send Inquiry to This Supplier
You May Also Like
-
Endress+Hauser E+H Compact Conductivity Device Smartec CLD18-BGGENegotiableMOQ: 1 Piece
-
High Quality Low Price Switch Cabinet & Transformer Partial Discharge Tester (Handheld Type)US$ 2999 - 4999MOQ: 1 Set
-
Universal Testing MachineNegotiableMOQ: 2500 Pieces
-
Computer Control Hydraulic Universal Testing MachineNegotiableMOQ: 1 Set
-
Hydraulic Plastic Flange Connections Cover Plugs SHF SeriesUS$ 0.22 - 0.28MOQ: 2500 Pieces
-
Gates 550C 550U U550 U-550 U508 U-508 Japan Unitta U-550 Belt Tension Meter New U-508 Belt Tension Meter Upgraded Version U550US$ 1 - 900MOQ: 1 Piece
-
Vertical Rod Type Floor-type Electrostatic Discharge Tester / Electrostatic Discharge Device for Human BodyUS$ 20 - 93MOQ: 1 Piece
-
Analytical Balanace.scale ,weichengya Laboratory SupplierUS$ 10 - 35MOQ: 10 Sets
-
Smart MD-3051 Online Density Meter With 4-20mA OutputUS$ 2,380 - 2,500MOQ: 1 Unit
-
5W-300W Sun Simulator Watt Testing 30% Off / Xenon Lamp Sun Simulator Free Sent / Sun Simulator TestingUS$ 7,500 - 10,000MOQ: 1 Set
