PLC Touch Screen High and Low Temperature Test Chamber
High low temperature test chamber
Application:
High and low temperature test chamber is a test equipment that simulates the temperature change in the natural environment by technical means to test the performance of the specimens.
It is mainly used to test the heat and cold resistance of specimens, which is widely used in electronics, electrical appliances, communications, instruments, vehicles, plastic products, metals, food, chemistry, building materials, medical treatment, aerospace and other fields.
Technical parameter:
Model |
HLT7006HD |
HLT701HD |
HLT702HD |
HLT705HD |
HLT710HD |
Internal volume |
64 L |
110 L |
252 L |
504 L |
1000 L |
Internal dimensions (D*W*H) |
400*400*400 mm |
450*450×*550 mm |
600*600*700 mm |
700*800*900 mm |
1000*1000*1000 mm |
External dimensions (D*W*H) |
1250*900*1300 mm |
950*900*1500 mm |
1500*850*1650 mm |
1750*1050*1850 mm |
2100*1200*1950 mm |
Temperature control mode |
BTC: Balanced temperature control system |
||||
Working environment temperature |
+5~+35 ℃ |
||||
Performance | |||||
Temperature range |
-70℃~+150℃ (high temperature: 180℃, optional); (low temperature: -80℃, optional); |
||||
Temperature fluctuation |
≤±0.5℃ |
||||
Temperature uniformity |
≤2.0℃ |
||||
Temperature deviation |
±2.0℃ |
||||
Heating and cooling rate |
≥1℃(-55℃~+85℃) |
||||
Material | |||||
Shell material |
Cold rolled sheet steel, spray plastics on surface |
||||
Internal material |
SUS304 Stainless steel |
||||
Thermal insulation material |
Glass wool or polyurethane foam |
||||
Refrigeration system | |||||
Refrigeration mode |
Mechanical compression, two-stage refrigeration |
||||
Compressor |
International well-known brand |
||||
Refrigerant |
R404A/R23 |
||||
Cooling mode |
Air cooling |
||||
Control system | |||||
Controller |
Programmable controller, color LCD touch screen |
||||
Communication interface |
RS485, USB or LAN interface (Optional according to customer requirements) |
||||
Heater |
Nickel-chromium alloy heating wire |
||||
Temperature sensor |
Pt100 |
||||
Blower |
Centrifugal blower |
||||
Observation window |
240×240 mm or 260×350 mm |
400×470 mm or 400×500mm |
|||
Testing hole |
On the left side wall, size: Ф80mm, silicone rubber sealing plug with metal cap (Or optional according to customer requirements) |
||||
Power supply |
AC380V±10%, 50±1Hz, three-phase four-wire + earth wire, ground resistance4Ω |
||||
Send Inquiry to This Supplier
You May Also Like
-
Walk in Temperature and Humidity Test ChamberUS$ 20000 - 100000MOQ: 1 Set
-
Programmable Salt Spray Test ChamberUS$ 7000 - 20000MOQ: 1 Set
-
Salt Spray Corrosion Test ChamberUS$ 7000 - 20000MOQ: 1 Set
-
Thermal Shock ChamberUS$ 10000 - 40000MOQ: 1 Set
-
Two Zones High and Low Temperature Thermal Shock ChamberUS$ 10000 - 40000MOQ: 1 Set
-
Three Zones High and Low Temperature Thermal Shock ChamberUS$ 10000 - 40000MOQ: 1 Set
-
Three Zones Temperature Thermal Shock ChamberUS$ 10000 - 40000MOQ: 1 Set
-
Sand and Dust ChamberUS$ 10000 - 20000MOQ: 1 Set
-
IP Sand And Dust Test ChamberUS$ 10000 - 20000MOQ: 1 Set
-
Xenon Lamp Weather Resistance Test ChamberUS$ 7000 - 20000MOQ: 1 Set