Best Price Electronic Security Equipment Airport Walk Through Metal Detector

X-ray use penetrate inspection, can detect the object metal structure, display where is invisible to the naked eye. Used in the factory testing of security products and business units such as: airport, electronic factories, shoe factories, toy factories, courts, railway stations, and event bag, line security management package

Specifications
1)operating temperatures
-20`C to +70`C;humidity:to 95% non-condensing
2)power fully automatic 100 to 240VAC,50 or 60 hertz,5watts;no rewiring, switching or adjustments required
3) weatherproofing/foreign object protection standards meet IP55,IEC standard.
4)traffic counter
counter count the number of passenger that have passed through the detector, the number of alarms and calculates alarm percentage
5)synchronization
dual channels and DSP circuit allow several JH-33Z's to operate simultaneously in close proximity to another
6)alarms
audible tone and volume adjustable.bright LED visual alarm
7)target pinpoint lights
thirty-three distinct zones are displayed with two independent columns of LED' located on exit side of the gate
Dimensions

external size(cm):220(height)x80(width)x50(depth)
internal si'ze(cm):201(height)x70(width)x50(depth)
shipping size(cm): 230x65x19 (side panel ) 76 x 38 x26cm (control box)
shipping weight: 75kg

Features
Easy Assembly
Modular design allows for a quick and easy assembly, only 4 screws to mount it.
Pinpoint Detection Zones

on the entrance of the archway ,there traffic light to remind you the detector is ready for passenger.
Audible and visual alarms
there is audible alarm and visual LED lights signal when a target has been detected ,the pinpoint lights on the exit gatepost will show the location of any offending object.
Touchpad controls
The access control panel is designed for use by authorized personnel with specific, multi-level security codes.it allows authorized users to change settings.
Self-test
no battery is required for memory retention.while the unit is in operation,a self-test is performed , any failures or problems will be immediately reported on the LCD display