- SaiRui(GZ) test equipment CO.,LTD
- China Manufacturer with main products:Safety instruments ,AC capacitor test equipment ,Gauge capacitor test equipment ,Electrolytic capacitor test equipment ,DC-link electrical container test equipment ,Aging power supply ,Test load ,Battery test equipment ,Lamp test equipment ,Other components test equipment ,System integration test equipment ,Mechanical life test equipment
Home > Products > Battery testing equipment > Battery Extrusion testing Machine
Battery Extrusion testing Machine
- 999 Set / Sets per Month
Product Details
Brand Name: | China Electronic Product Reliability and Environmental Testing Research Institute | Place of Origin: | China | Model Number: | 7201A |
Power: | Electronic | Usage: | Other |
Product Description
Characteristics of [Battery Extrusion testing Machine]
1. Application of standard GB31241-2014,IEC62133,UL1642-2009,GB/T28164-2011 and other test requirements;
2. Test the safety performance of the battery during extrusion;
3. Adopt hydraulic press as power source;
4. Release immediately after reaching the set pressure;
5. With wireless remote control device (controlled test start-up and stop, effective control range within 10 meters);
6. Using 7-inch real-color touch screen display, setting parameters and operation;
7. Can do according to customer demand non-calibration;
8. In accordance with 3C standard: external circuit short circuit test item and extrusion test item.
Brief introduction of [Battery Extrusion testing Machine]
7201 A battery extrusion test machine meets the extrusion clauses of GB31241-2014,IEC62133GB (7.6) and GB/T28164-2011 (4.3.6). The whole machine adopts hydraulic system as the test power unit with wide range of movement and remote start-up and stop device. It can be used for extrusion test of many kinds of single battery samples. Equipment through extrusion test to verify the safety of the battery, after the test, the battery should not fire, do not explode, is the battery manufacturers and research necessary testing equipment.
Technical parameters[Battery Extrusion testing Machine] (non-standard customizable)
1. Power source: hydraulic press;
2. Extrusion pressure: 13kN + 0.78kN;
3. Battery voltage measurement range: 0 ~ 9999mV, error: ±1% ±2 words, display resolution 1 mV;
4. Extrusion stroke range: 1~ 180mm, error: ±1% FS, display resolution 1 mm;
5. During the test, when the sample has a set pressure drop value, extrusion degree or maximum extrusion pressure, immediately release the pressure.
6. Travel length: more than 180 mm;
7. Number of workers: 1;
8. Control system: adopt PLC and 7-inch color touch screen digital control system, and have wireless remote control device;
9. Test table: stainless steel test table with safety shield cover, horizontal extrusion specimen (sample placement is more convenient);
10. Working power supply: 220V ±10%, 50Hz ±2Hz.
Repair and maintenance of [Battery Extrusion testing Machine]
Overhauling:
1. Phenomenon: moving rod output jitter.
Cause: oil leakage or mixed air.
Remove: replace oil leakage connector and run empty for many times until the rod is running properly.
2. Phenomenon: ranging function failure.
Cause: the range controller probe is covered with dirt.
Remove: clean up probe dirt until empty operation is normal.
3. phenomenon: when the power switch is started up, no power is applied.
Cause: internal air switch overcurrent protection starts
Troubleshooting: set the internal air switch to ON and power on; to repeat this failure, please contact us.
4. If there is any trouble, please let us know, we will provide you with good after-sales service.
Maintenance:
1. Working oil recommended no. 46 anti-wear hydraulic oil, the use of oil temperature in the range of 15 ℃ 60 degrees Celsius.
2. The oil industry is strictly filtered before it is allowed to be added to the fuel tank.
3. The working fluid should be replaced every year, the first of which should not be more than three months;
4. The slider should be lubricated regularly, the appearance of the column should be kept clean, and the oil should be sprayed before each work.
5. Overloading or maximum allowable eccentricity shall not be used.
6. Check the pressure gauge semi-annually;
7. After the machine is stopped for a long time, the surface of the machine shall be cleaned and coated with anti-rust oil.
The instrument is placed in a ventilated and dry room. When the instrument is not in use for a long time, the mechanical fixture is protected by oil.
For more information about products, please contact us and visit the company.
Address: Tianhui Road, Wisdom City, Tianhe District, Guangzhou
Tel: 86-20-37896688
Fax:86-20-37896699
Mobile phone: 86-13711272581,Miss Liu
Web site:
Contact Us
- SaiRui(GZ) test equipment CO.,LTD
- Contact nameMrs liu
- Phone86-020-37896688
- AddressThe tianhe district Guangzhou,Guangdong
- Stainless Steel Constant Temperature And Humidity Test Chamber Climate Test Machine Environmental Testing Box
- Good Supplier Index Meter Rubber Melt Flow Rate Test Machine Index Tester Index Test Instrument
- Used Temperature And Humidity Test Chamber High And Low Temperature Test Chamber Climate Aging Testing Machine
- JINGYAN Low Temperature Test Chamber Constant Temperature And Humidity Machine Environmental Aging Test Chamber
- Table Type UV Weather Resistance Testing Machine UV Test Chamber Climate Aging Resistance Test Equipment
- Programmable Temperature And Humidity Testing Machine Climatic Aging Test Chamber Environmental Chamber
- Wholesale Temperature And Humidity Testing Chamber Climatic Test Chamber Environmental Test Equipment
- ASTM D4060 TABER Abrasion Tester Textile Abrasion Test Equipment TABER Wear Testing Machine
- Rotary Taber Abrasion Tester Taber Abrasion Resistance Test Machine Leather Wear Resistance Testing Equipment
- Most Popular UV Accelerated Aging Testing Machine Plastic Aging Test Equipment Climate Test Chamber
- Programmable UV Accelerated Aging Test Machine UVA Weathering Tester Rubber Aging Testing Equipment
- Programmable QVA Aging Test Machine Plastic Weathering Aging Tester Climatic Test Chamber
- JINGYAN Testing Instrument Simulated UV Weathering Tester UV Aging Test Chamber Environmental Test Chamber
- Air Permeability Tester
- Transportation Seismic Tester Simulated Transportation Shaker Table Mobile Phone Vibration Tester Mechanical Vibration Tester
- Random Vibration Tester Packaging Vibration Test Machine Simulate Transportation Vibration Testing Machine
- Professional Simulation Transport Shaking Tester Carton Vibration Table Automobile Vibration Testing Machine
- Photovoltaic inverter interface converter combined with 698 protocol converter to achieve information collection of inverter power generation and consumption
- Laboratory Testing Equipment Cardboard Boxes Single Arm Drop Test Machine Packaging Drop Impact Tester
- Most Popular Falling Drop Fatigue Testing Machine Carton Drop Tester Package Drop Test Equipment
- Universal Testing Machine Tape Peel Tester Adhesive Tapes Peel Strength Test Equipment
- Electric Tape Peeling Force Testing Machine PE Peel Tester 90 Degree Peel Strength Test Equipment
- ASTM D 4966 Non Woven Textile Fabric Abrasion Tester Martindale Pilling Test Machine
- ISO 15527 Textile Wear Resistance Testing Machine Martindale Test Equipment Floor Abrasion Tester
Popular Searches
Find Similar Products By Category
- Measurement & Analysis Instruments > Testing Equipment
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Mrs liu
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-