Silicon Extruder ST03 Two Component silicon Extruder

Silicon Extruder   ST03 Two component Silicon Extruder machine

1. Mixing ration proportion of mixture :  6:1-14:1

2. Raw material barrel : 55galon

3.Solidification pharmaceutical barrel: 5galon

4. Max. air-consumption volume: 0.5m3/min

5. Max. squeeze pressure: 20Mpa

6. Air source pressure : 0.5-0.8mpa

1. It is composed of raw material pump,solifification pharmaceutical pump, Proportional pump, sealant-mixture system, hydraulic pressure system, electronic system and so on.

2. Raw material pump, solidification pharmaceutical pump and proportional pump adopt the special high-pressure filling pump and the material can be supported equivalently in two-way. The raw material pump is compelled by the hydraulic pressure system while the solicitation pharmaceutical pump is compelled by the pneumatic motor.

3. There are high-pressure values in the under part entrance of solidification pharmaceutical filter and material-feeding place of the mixing device and one-way valve is set in the nixing device so as to prevent two-components from fleeing each other.

4. Rising and falling system is controlled by hand valve and the proportion of the two components can be changed by adjusting the slipper in the swinging pole.Tightening the nut once the demanding once is reached.

Contact person: MS. Lucy

Whatsapp or Mobilephone: +86 15169042082

Warmly welcome to contact me. :) Thanks in advance.

Others Insulating glass machines:

Silicon Sealing Robot

Aluminum spacer bar bending machine

Automatic desiccant filling machine

Butyl Extruder machine

Glass washing machine

Automatic Glass cutting machine