Single 1000M Gigabit Ethernet POE (PSE) Fiber Media Converter
Description:
BD-1000M-POE series is a 10/100/1000Base-TX to 1000Base-FX (also can be forced to 100Base-FX) media converter, which allows two types of network segment to be connected easily. Complied with IEEE802.3at or IEEE802.3af standard, the AC/DC powered PoE media converter is a Power Sourcing Equipment (PSE) which combines data transfered over a fiber optic link with 48V (or other voltage) power supply, providing power to IEEE802.3at or IEEE802.3af powered device (PD) over CAT5e/CAT6 UTP cable (cable length up to 100meters / 330feets). The converter includes a single port PSE controller, which offers PD signature sensing and power monitoring features. Other features include over-current protection, LFP function, etc. The LFP (Link Fauit Pass-through) allows the media converter to monitor both the fiber and copper RX port for loss of signal. In case of a loss of RX signal on one media port, the converter will automatically disable the TX signal to the other media port, thus passing through the link fault.
Features:
-
2 10/100/1000Base-TX UTP to 1000Base-FX fiber media convertion
2 IEEE802.3af PoE PSE compatible
2 9K bytes packet at cut-through mode
2 Built-in AC/DC power supply
2 Over-current protection
2 choice of SC, BiDi or LC connectors for multimode and singlemode
2 DIP switch to set different configurations
2 LFP (Link Fault Pass-through) support
Product parameter:
1000Base-FX Optical interface:
Connector: SC,FC or ST are optional
Wavelength: 1310nm,1550nm or 850nm(can be chosen by customer)
Optical fiber category:
Ø single-mode 8.3/125, 8.7/125, 9/125, 10/125um
Ø multi-mode 50/125, 62.5/125, 100/140um
multi- mode connection: transmitting range can reach 5 kilometers as farthest;
single-mode connection: transmitting range can reach 100 kilometers.
10/100/1000M Base-TX:
Connector: UTP RJ45 connector
Data Rates:
10/100/1000Mbps
(IEEE802.3U IEEE802.3z 1000Base-Tx)
1000Mbps (1000Base-FX) or
100Mbps (100Base-FX)
Optical Specification :
Fiber connector |
SC/ST |
SC |
SC |
SC |
type |
multimode |
Single mode |
Single mode |
Single mode |
wavelength |
850/1310nm |
1310nm |
1310nm |
1310nm |
Transmission distance |
500m |
25km |
40km |
60km |
TX send power(min) |
-19.0dBm |
-15dBm |
-9.0dBm |
-4.0dBm |
TX send power(max) |
-12.0dBm |
-9.0dBm |
-5.0dBm |
0dBm |
Receive sensitivity |
||||
Link Budget |
11.0dBm |
15.0dBm |
24.0dBm |
32.0dBm |
Power over Ethernet Output:
Pin Assignment and Polarity:4/5 (V+),7/8 (V-)
Output Power: please refer to ordering information
Efficiency: 75% min
Short circuit protection: auto recovery
Over current protection: auto recovery
95mm(L)x70mm(W)x26mm(H)
Environment condition
Operating temperature: 0C~+55 C
Storage temperature: -20 C~+70 C
Relative temperature: 95%
Ordering information
Part Number |
Supported Standard |
Output Voltage |
Output Current |
Output Power |
Remark |
BD-1000M-POE |
IEEE 802.3af |
48V |
0.35A max |
15.4W max |
default |
BD-100M-POE-A |
IEEE 802.3af |
48V |
0.54A max |
25W max |
optional |
BD-100M-POE-B |
IEEE 802.3af |
52V |
0.60A max |
30W max |
optional |
BD-100M-POE-C |
Non-standard |
48V |
0.60A max |
30W max |
optional |
Send Inquiry to This Supplier
You May Also Like
-
10/100M LFP Fiber Media ConverterUS$ 7 - 14MOQ: 1 Piece
-
10/100M POE Fiber Media ConverterUS$ 25 - 35MOQ: 1 Piece
-
Single Port 10/100M POE Fiber Media ConverterUS$ 15 - 35MOQ: 1 Unit
-
2 Fiber Ports 4 UTP Ports 10/100M Optical Media ConverterUS$ 30 - 50MOQ: 1 Unit
-
Dual Fiber 2 10/100/1000M Ethernet Fiber Media ConverterUS$ 10 - 17MOQ: 1 Piece
-
Dual Fiber 10/100/1000M Ethernet Fiber Media ConverterUS$ 12 - 22MOQ: 1 Piece
-
Single Fiber WDM 10/100/1000M Ethernet Fiber Media ConverterUS$ 15 - 25MOQ: 1 Piece
-
10/100/1000M SFP Media ConverterUS$ 6 - 13MOQ: 1 Piece
-
6Port SFP Media Converter Fiber Switch With 2*SFP 4*RJ45US$ 27 - 47MOQ: 1 Piece
-
10G SFP+ to SFP+ Fiber Converter OEO 3R RepeaterUS$ 400 - 500MOQ: 1 Piece