BW150 Mud Pump For Well Drilling|factory price in promotion

Description of BW150 Mud Pump For Well Drilling:

1 three-cylinder reciprocating single-acting piston pump, can change eight different pressure and flow.

2 pumps consume less energy, flexible operation, high quality and durable.

3 good decomposition, easy to move.

4 business and market synchronization, management and the world

Introduction of BW150 Mud Pump For Well Drilling:

BW150BW150 mud pump well drilling  is a research and development, production and sales as one of the large enterprises, the current production and operation of the brand has nearly 1,000 species, the main production and operation of coal mining equipment. In the machinery marketing industry to create a good product performance, with a strong brand promotion capabilities. Companies in the "quality of survival, to the credibility of development" concept, brought together a large number of elite talent, won a good corporate reputation and reputation.

Appplication of BW150 Mud Pump For Well Drilling:

 The BW150 mud pump are widely used in mining, geological drilling, coal, railways, highways, water conservancy and hydropower, bridges, high-rise buildings, foundation reinforcement and other projects.

Three product parameters:

FourBW150 mud pump well drilling Note:

BW150 grouting machine work on the whole set of drilling equipment production efficiency plays a significant role. Proper maintenance and use of the grouting machine to improve drilling speed and pure drilling time, to protect the hole clean, and can wall collapse and stuck drill accident to minimize. 1, grouting machine in the open before the maintenance and repair

The grouting machine must be mounted on a solid foundation. The parallelism of the prime mover and the grooved pulley shaft and the position of the drive belt must be checked so that they are all in one plane and then tightened with the ground screw. In order to pump to work properly, should be based on the rig site to consider the backwater tank, sedimentation tanks, suction pool and pump the reasonable installation location, BW150 drilling mud pump should be as short as possible suction pipe and suction height. In alpine areas or installation locations where suction sumps are too high, a supplementary inhalation system should be considered.

In the grouting machine should be carried out before the grouting machine system for a comprehensive inspection:

First of all, should carefully check the reciprocating pump power side parts fastening, with the gap, lubrication and so on. Should pay special attention to check the piston compression nut and the crosshead and piston rod connection is tightened; connecting rod bearing, cross head sleeve and slip sleeve with the gap is satisfactory; clutch and variable speed mechanism is flexible and reliable; Crankcase and the clutch device is sufficient oil; hand rotating pulley or motor to see if there is no internal rotation, and adjust the degree of belt tension.

Second, the hydraulic end of the entire circulatory system for careful examination, special attention should be paid to check the bottom of the valve and the water filter inlet hole is blocked by dirt, the bottom valve should be open and close freely close tightly.Hose and water filter at both ends And the suction port connection should ensure that the seal; mud pump well drilling suction valve movement is impeded, the valve seal is good; check whether part of the seal is tightly sealed to prevent leaks leaks and then check the pressure gauge and the buffer device is sensitive and accurate; Turn the valve back to the water position, is discharged into the mud pool; open a suction valve chamber, the suction pipe filled with water.

2, the use of the grouting machine in operation and maintenance

After doing the above work, the clutch handle on the idle position, start the prime mover, check the pump pulley rotation direction to meet the requirements. Closing the clutch with no load on the pump, the operation should be smooth slightly slower. When the pump is running normally, gradually close the back valve in order to smooth the hole would like to transport rinse fluid. When the pump is working properly, for speed control operation must stop the pump, the side of the operation damage to the machine parts.

In order to ensure the normal operation of the pump to prevent the washing fluid sand and high-pressure washing fluid erosion caused by continuous erosion of the pump head inside the body prematurely damaged, we must note the following:

(1) in the normal working process of the pump to check the lubrication of the moving parts, crankcase lubricating oil always ensure quality, pay attention to whether there is abnormal sound, and promptly removed. Always check that the seals are tight.

(2) to pay close attention to the quality of the mud, such as excessive sand or gravel found debris, we must strengthen the purification and filtration. Pump can no longer work under water conditions, water filter from the bottom of the water 0.2-0.3m, and pay attention to cleaning the bottom valve and filter cover.

(3) Note that the pressure gauge, mud pump bw-150 safety valve work is normal, the maximum working pressure, the duration should not be too long to not more than one hour is appropriate.

(4) dry friction clutch is not easy to stick oil, to prevent the friction plate and pressure plate in the combination of sliding, leaving the friction. Is important to ensure the normal work of the clutch.

(5) crankcase oil temperature and the temperature of the cylinder piston pair shall not be too high. When the drilling is completed, the grouting machine stops working, the first three-way valve to the backwater position unloading, and then stop the pump. If the pump stopped in the cold winter season longer, to release the pump and pipeline rinse solution to prevent the cylinder head and even some of the organs of the pump head to the crack. If the pump is stopped for a long period of time, the oil in the crankcase will need to be discharged to clean up the silt and dirt on the parts. The shafts of the crankshaft, gears, crossheads, crossheads, piston rods and safety valves On the butter to prevent corrosion.