Contact Platform Support
Help CenterNickel Surface Chemical Seven Color Passivation Agents Chemical Passivation Agents
Related Products
-
The Activator Before Copper Alloy Chemical Nickel Plating Copper Alloy Pretreatment Liquid Nickel Plating ActivatorUS$ 88.46 - 96.15MOQ: 1 Barrel -
The Sensitizer Before Chemical Plating Oxidizing Agent Before Copper Plating Catalytic AgentUS$ 192.31 - 200MOQ: 1 Barrel
-
No Wax Type Metal Wire Drawing Brightener Copper Alloy Brushed Brightener Copper Alloy Brushed Brightening AgentUS$ 234.62 - 242.31MOQ: 1 Barrel
-
Chromium Plating Layer Activator Activator for Chromium Plating LayerUS$ 80.77 - 88.46MOQ: 1 Barrel
-
Environmental Silver Etching Agent Metal Etching Fluid Alkaline Etching SolutionUS$ 119.23 - 126.92MOQ: 1 Barrel
Nickel surface chemical seven color passivation agent
First, the product code: Q / YS. 630 (Yi Shun brand)
Second, product features:
This product can be used for chemical nickel plating, nickel plating on the surface of the seven colors, rich colors and beautiful, simple operation, just soaked. Good film adhesion. Will not fade, you can get on the colorful can passivation nickel, product environmental protection.
Third, product index:
1. This product is light yellow odorless transparent liquid.
2. This product PH value
3. Specific gravity> 1.0
Fourth. Instructions:
1. Nickel activation. If the nickel layer is just plated and not placed for too long, it may not be activated.
2. Nickel seven passivation agent added to 1 times the tap water, heated to 90 ℃.
3. Take a few pieces of zinc alloy, contact with nickel, placed in a plastic container, the color of the workpiece at 90 ° C passivation of seven-color nickel into the workpiece container, and immediately shake the potion and the workpiece, soak for 10-20 seconds , The nickel surface will be passivated into an irregular red, yellow, green, blue and purple seven colors.
Wash the workpiece
5. Drying
Fifth, note:
1. Passivation time can not be too long, otherwise the film layer becomes black, easy to fall off.
2.zinc alloy not too little or too much.
Our services
Order Guangzhou YiShun Chemical Company's products, you will have the following technical support: 1, selection of professional engineers. 2, phone detailed understanding.3, video demo. 4, live demonstrations. 5, site service.6, special technology R & D and preparation. 7, continue to follow the sale.
Send Inquiry to This Supplier
You May Also Like
-
The Treatment Agent Before Inferior Brass Blackening Inferior Brass Preoxidizing Agent Chemical AdditivesUS$ 119.23 - 126.92MOQ: 1 Barrel
-
Metal Coloring Five Colorful Metal Multicolored Colorant Metal Coloring AgentUS$ 111.54 - 119.23MOQ: 1 Barrel
-
Metal Etching Solution Chemical Etching Fluid Circuit Board Etching SolutionUS$ 119.23 - 126.92MOQ: 1 Barrel
-
Titanium Alloy Polishing Agent Metal Polishing Bright LiquidUS$ 142.31 - 142.31MOQ: 1 Barrel
-
Titanium Alloy Etching Solution Metal Etching Solution Lettering Etching SolutionUS$ 119.23 - 126.92MOQ: 1 Barrel
-
The Treatment Agent That Aluminium Before Nickel Plating Normal Temperature Nickel Plating Pretreatment FluidUS$ 161.54 - 176.92MOQ: 1 Barrel
-
Titanium Alloy Matte Gray Agent Titanium Alloy Matting Agent Electroless Matting Process for Titanium AlloyUS$ 88.46 - 88.46MOQ: 1 Barrel
-
The Activator for Non-metallic Before Nickel Plating Metalloid Chemical Before Nickel Plating Active AgentUS$ 121.38 - 122.31MOQ: 1 Barrel
-
The Activator for Metal Before Chemical Nickel Plating Chemical AdditivesUS$ 88.46 - 96.15MOQ: 1 Barrel
-
Coarsening Agent Metalloid Surface Coarsening Agent Plastic Coarsening Treatment AgentUS$ 80.77 - 88.46MOQ: 1 Barrel
