Contact Platform Support
Help CenterThe Activator for Non-metallic Before Nickel Plating Metalloid Chemical Before Nickel Plating Active Agent
Related Products
-
The Activator for Metal Before Chemical Nickel Plating Chemical AdditivesUS$ 88.46 - 96.15MOQ: 1 Barrel -
Coarsening Agent Metalloid Surface Coarsening Agent Plastic Coarsening Treatment AgentUS$ 80.77 - 88.46MOQ: 1 Barrel
-
Tin-plated Environmentally Friendly Chromium-free Passivation Agent Chemical AdditivesUS$ 96.15 - 103.85MOQ: 1 Barrel
-
Nickel Surface Chemical Seven Color Passivation Agents Chemical Passivation AgentsUS$ 103.85 - 111.54MOQ: 1 Barrel
-
The Activator Before Copper Alloy Chemical Nickel Plating Copper Alloy Pretreatment Liquid Nickel Plating ActivatorUS$ 88.46 - 96.15MOQ: 1 Barrel
The activator for non-metallic before nickel plating
First, the product code: Q / YS.628 (Yi Shun brand)
Second, the product uses:
This product can be widely used in non-metallic surface (such as ceramic, carbon rod, silicon powder, silicon, all kinds of powder, large non-metallic crafts, ABS, resin, wood, diamond, plastic, cotton fiber, Activation before nickel plating, non-metallic surface can immediately form a conductive metal layer, in order to facilitate the subsequent copper, nickel and other treatment.
Third, the use of methods:
① The activator stock added 5 times tap water (purified water better), and then add the weight of the dilution of 10 ~ 15g / KG of the chemical nickel pre-activation additive (Q / YS.628-additives), stir, that is be usable.
② The non-metallic workpiece immersed in the activator working fluid for about 10-30 seconds, turn the workpiece halfway, so that even activation, do not wash.
③ Remove the workpiece, dry or at room temperature air-dry, dry can, when the workpiece has been activated, the workpiece can not be washed.
④ The activation of the workpiece is immersed in 90 ℃ ± 3 ℃ chemical nickel plating nickel plating to form a metal layer, the time is greater than 5 minutes.
⑤ Follow-up treatment: According to customer requirements to do other treatment (such as copper, nickel, silver, tin, etc.).
Fourth, note:
① This product is strictly prohibited with any other chemicals mixed.
② This product is strictly prohibited acid, alkali, strong heat, strong oxidants.
③ Please keep low temperature or room temperature dry conditions, stored in a cool and clean place.
Our services
Order Guangzhou YiShun Chemical Company's products, you will have the following technical support: 1, selection of professional engineers. 2, phone detailed understanding.3, video demo. 4, live demonstrations. 5, site service.6, special technology R & D and preparation. 7, continue to follow the sale.
Send Inquiry to This Supplier
You May Also Like
-
The Sensitizer Before Chemical Plating Oxidizing Agent Before Copper Plating Catalytic AgentUS$ 192.31 - 200MOQ: 1 Barrel
-
No Wax Type Metal Wire Drawing Brightener Copper Alloy Brushed Brightener Copper Alloy Brushed Brightening AgentUS$ 234.62 - 242.31MOQ: 1 Barrel
-
Chromium Plating Layer Activator Activator for Chromium Plating LayerUS$ 80.77 - 88.46MOQ: 1 Barrel
-
Environmental Silver Etching Agent Metal Etching Fluid Alkaline Etching SolutionUS$ 119.23 - 126.92MOQ: 1 Barrel
-
The Treatment Agent Before Inferior Brass Blackening Inferior Brass Preoxidizing Agent Chemical AdditivesUS$ 119.23 - 126.92MOQ: 1 Barrel
-
Metal Coloring Five Colorful Metal Multicolored Colorant Metal Coloring AgentUS$ 111.54 - 119.23MOQ: 1 Barrel
-
Metal Etching Solution Chemical Etching Fluid Circuit Board Etching SolutionUS$ 119.23 - 126.92MOQ: 1 Barrel
-
Titanium Alloy Polishing Agent Metal Polishing Bright LiquidUS$ 142.31 - 142.31MOQ: 1 Barrel
-
Titanium Alloy Etching Solution Metal Etching Solution Lettering Etching SolutionUS$ 119.23 - 126.92MOQ: 1 Barrel
-
The Treatment Agent That Aluminium Before Nickel Plating Normal Temperature Nickel Plating Pretreatment FluidUS$ 161.54 - 176.92MOQ: 1 Barrel
