Contact Platform Support
Help CenterAutomatic Autoclaved Aerated Concrete AAC Block Machine For Sand Lime Brick
Related Products
-
Autoclaved Aerated Concrete Equipment AAC Block Machine For Fly Ash BlockNegotiableMOQ: 1 Piece -
Annual Output 50000m3 Sand Aac Block Production LineNegotiableMOQ: 1 Set
-
Chemical Laminated Vulcanizing Autoclave Aerated Concrete / Autoclave Machine 2mUS$ 5 - 5MOQ: 1 Set
-
Autoclaving Sand / Lime AAC Block Production Line 150000m3NegotiableMOQ: 1 Set
-
High Efficient AAC Block Production Line Concrete Block Moulding MachineNegotiableMOQ: 1 Set
Certification:ISO9001：2008
AAC production Line AAC Plant(sand lime brick)
1) Our equipments produce AAC sand lime brick
Aerated concrete block material with cement,lime, gypsum and quartz sand,aluminum foam, It is a fine porous block after the steam pressure curing , the specifications for 600mm x (200, 250, 300(100) mm * 150, mm, 200). According to the different density mainly, aerated concrete block specifications are B05, B06 two levels, the average compressive strength is not less than 2.5 MPa and 3.5 Mpa, respectively. The thermal conductivity is less than 0.13 W / mK and 0.16 W / mK.
2) Technology Orientation of our equipment
Production and application of aerated concrete has a history more than 40 years in China. Viewing from technology point, high quality products can use 3mm special sand slurry technology to meet the construction requests and 50% energy saving goals. (When mortar joint is less than 3mm, take thermal conductivity coefficient of wall as 1; when mortar joint is more than 3mm, take thermal conductivity coefficient of wall as 1.5). Based on the history of the aerated concrete development, only high quality products can bring a prosperous market.
3) Production of our equipment specification
Products conform to requirement of 04~07 grade blocks stated in GB11968-2006.
General Specifications of Aerated Concrete Blocks
Working Principle:
Technical Parameter:
The formulation of aerated concrete of 600kg/m3 absolute dry volume weight is:
Sand : Quick Lime : Cement : Gypsum = 68 : 20 : 10 : 2
Aluminum accounts for 0.074% of the total volume of dry materials;
Ratio of water to material: 0.6~0.65.
Application Range:
Autoclaved Aerated Concrete, AAC Production Line, AAC Plant used for products of AAC.
Send Inquiry to This Supplier
You May Also Like
-
Meltblown PP Non-Woven Fabric Making Machine for Face Mask N95 Medical MaskNegotiableMOQ: 1
-
PVC Monofilament Extruding Line(Used), Monofilament Machine, Monofilament EquipmentUS$ 8 - 10MOQ: 1 Piece
-
Production Line Used for Granules Powder Material FeederUS$ 650 - 800MOQ: 1 Set
-
TZ Brand Plastic Filament Extruding MachineNegotiableMOQ: 1 Set
-
Mono Layer Extrusion Air Bubble Film Extrusion LineryUS$ 20,000 - 60,000MOQ: 1 Set
-
LIANJI Plastic Extrusion Blow Molding MachineUS$ 99 - 199MOQ: 1 Set
-
PP/HDPE Flat Yarn Making Machines for Woven Bag/Cement Bag/Container Bag PlantsUS$ 8,500 - 8,500MOQ: 1 Set
-
Chinese Waste Plastic Board Recycling MachineUS$ 40,000 - 48,000MOQ: 1 Set
-
The Waste Tire Recycling Production Line With CE ISO SGSUS$ 20,000 - 80,000MOQ: 1 Set
-
Plastic Board Production LineUS$ 6.98 - 15.64MOQ: 500 Pieces
