Electricity Shot Blasting Equipment For Forging Castings Descaling

Delivery Time:45 Days
Certification:Qualified

Rubber Belt Shot Blasting Machine for Forging Castings Descaling

Rubber Belt Shot Blasting Machine Description

Our rubber belt shot blasting machine is equipped with high tensile and wearable rubber or manganese steel.  The working principle is that the impeller blasting the high spead shots onto the rolling workpieces on the rubber. As rolling continuously, the workpieces could be processing evenly. So rubber belt shot blasting machine is suitable for the sands cleaning, rust cleaning, descaling and surface strenghening of small castings, forgings, stampings, gear wheel, springs and so on, especially for the workpieces which is resistant to corrision. 

Structure of Rubber Belt Shot Blasting Machine

Items	The main parts
Blasting Chamber	Chamber cover, liners, end plate, manual door, etc
Blasting Wheel	Blasting Wheel, Motor, Pulley, Triangle Belt, Base Plate, Etc
Elevator System	Cover, Elevator Belt Assembly, Pulley, Drive, Tight Device, Etc
Separator System	Separator, Shot Bucket, Etc
Screw conveyor	Screw shaft, blades, bearing base, etc
Belt System	Rubber belt, drive shaft and driven shaft, tight shaft, drive system, etc
Pneumatic System For Shot	Shot gate, cylinder, shot- slip pipe, air processor, etc
Electronic Control System	Control cabinet (conventional electronic control), the second line, etc
Dust Collector System	Bag type dust collector , sedimentation tank, piping, blower, etc

Rubber Belt Shot Blasting Machine Advantage

1. Special thin and small workpieces can be also processed.
Shot blasting room with unique structure can clean and process the common casting and forging workpieces.Even very small and thin pieces can be handled without any damage.
2. Input and discharge simply and accurately.
For the smooth movement,the workpieces will not be hurted.It can be moderately and completely inputted and discharged, easy to be operated.
3. Simple maintenance

Rubber Belt Shot Blasting Machine Operation

1. Add the shots and load in the workpieces, then close the door.

2. Start the fan of the dust collector.

3. Start elevator, blasting wheel and shot supply valve in turn. 

4. After finishing cleaning process, stop shot supply valve, blasting wheel elevator and dust collector fan in turn.

5. After the machine stop completely, open the workpiece feeding door, unload the workpieces.

6. Emergency stop switch is for emergency situation. The whole machine will stop immediately after pressing the button.

7. Dust collector should be stop timely after finish all the duty.

Notice and Maintenence

1. Regularly cleaning the collect box of the dust collector to protect the dust removing pipe from blacking.

2. Cleaning the bottom of the blasting room and the separator frequently.

3. Often cleaning the shots around to avoid slipping and falling.

4. Regularly check the rubber belt and belt of the elevator to avoid deviating.

5. Never to open the workpiece feeding door unless the machine stop completely to avoid accident.

6. Frequently check the end plate of the blasting chamber and the wearable parts of the blasting wheel. To change the badly worn parts in time.

7. The machine must be lubricated periodical to guarantee flexible rotating.

8. regularly check and clean the drive section of the machine, change the badly worn parts.

Our service:

1. Reply your inquiry in 24 hours.

2. Experienced staffs answer all your questions in time.

3. Customized design is available.

4. Exclusive and unique solution can be provided to our customer by our well-trained and professional engineers and staff.

5. Special discount and protection of sales are provided to our distributor.

6. Professional factory: We are manufacturer, specializing in producing all kinds of Shot Blasting Machine & Molding Machine & Core Shooting Machine for more than 40 years, competitive with good quality.

7. As an honest seller, we always use superior raw material, advanced machines, skilled technicians to ensure our products to be finished in high quality and stable feature.