Contact Platform Support
Help CenterAuto Shot Blasting Machine Wheels , Blast Cleaning Equipment With Rubber Belt
Related Products
-
Automatic Shot Blaster Machine For Gears Surface Descaling / CleaningNegotiableMOQ: 1 Piece -
Critical Cleaning Rubber Track Shot Blaster Machine With PLC ControlNegotiableMOQ: 1 Piece
-
Customized Rubber Belt Wheel Blast Machine for Heat Treated PartsNegotiableMOQ: 1
-
Electricity Tracked Shot Blaster Machine for Ferrous Metal CastingsNegotiableMOQ: 1 Set
-
Descaling Industrial Shot Blaster Machine For Ferrous / Cast - Irons FoundiesNegotiableMOQ: 1 Square Meter
Certification:Qualified
Continuous Tumbler Wheel Shot Blaster Machine with Rubber Belt
Tumble Wheel Shot Blaster Machine Description
Our rubber belt shot blasting machine is equipped with high tensile and wearable rubber or manganese steel. The working principle is that the impeller blasting the high spead shots onto the rolling workpieces on the rubber. As rolling continuously, the workpieces could be processing evenly. So rubber belt shot blasting machine is suitable for the sands cleaning, rust cleaning, descaling and surface strenghening of small castings, forgings, stampings, gear wheel, springs and so on, especially for the workpieces which is resistant to corrision.
Structure of Tumble Wheel Shot Blaster Machine
| Items | The main parts |
| Blasting Chamber | Chamber cover, liners, end plate, manual door, etc |
| Blasting Wheel | Blasting Wheel, Motor, Pulley, Triangle Belt, Base Plate, Etc |
| Elevator System | Cover, Elevator Belt Assembly, Pulley, Drive, Tight Device, Etc |
| Separator System | Separator, Shot Bucket, Etc |
| Screw conveyor | Screw shaft, blades, bearing base, etc |
| Belt System | Rubber belt, drive shaft and driven shaft, tight shaft, drive system, etc |
| Pneumatic System For Shot | Shot gate, cylinder, shot- slip pipe, air processor, etc |
| Electronic Control System | Control cabinet (conventional electronic control), the second line, etc |
| Dust Collector System |
Bag type dust collector , sedimentation tank, piping, blower, etc |
Tumble Wheel Shot Blaster Machine Advantage
1. Used for surface cleaning, rust removing and surface intensification of various middle and small size casting, forging and workpieces.
2. Suitable for different production scale and can also be used in conjunction with the continuous conveyor components to form the production of clean-up lines.
3. Advanced design, reasonable structure
4. Little energy consumption and high efficiency.
5. This machine adopted the double plate impeller head, characterized as brief structure, easy to change impeller and high shot blast efficiency.
6. Efficient separator of shot from sand, high separating quality and productivity, long impeller lifetime.
7. The bag dust filter can greatly reduce air pollution and improve the work environment, complying with state emission standard.
8. Abrasion resistant rubber tumble belt, reducing noise and collision of work pieces.
9. Automatic discharging of materials after cleaning of work pieces, low labor cost.
Tumble Wheel Shot Blaster Machine Operation
1. Add the shots and load in the workpieces, then close the door.
2. Start the fan of the dust collector.
3. Start elevator, blasting wheel and shot supply valve in turn.
4. After finishing cleaning process, stop shot supply valve, blasting wheel elevator and dust collector fan in turn.
5. After the machine stop completely, open the workpiece feeding door, unload the workpieces.
6. Emergency stop switch is for emergency situation. The whole machine will stop immediately after pressing the button.
7. Dust collector should be stop timely after finish all the duty.
Notice and Maintenence
1. Regularly cleaning the collect box of the dust collector to protect the dust removing pipe from blacking.
2. Cleaning the bottom of the blasting room and the separator frequently.
3. Often cleaning the shots around to avoid slipping and falling.
4. Regularly check the rubber belt and belt of the elevator to avoid deviating.
5. Never to open the workpiece feeding door unless the machine stop completely to avoid accident.
6. Frequently check the end plate of the blasting chamber and the wearable parts of the blasting wheel. To change the badly worn parts in time.
7. The machine must be lubricated periodical to guarantee flexible rotating.
8. regularly check and clean the drive section of the machine, change the badly worn parts.
Our service:
1. Reply your inquiry in 24 hours.
2. Experienced staffs answer all your questions in time.
3. Customized design is available.
4. Exclusive and unique solution can be provided to our customer by our well-trained and professional engineers and staff.
5. Special discount and protection of sales are provided to our distributor.
6. Professional factory: We are manufacturer, specializing in producing all kinds of Shot Blasting Machine & Molding Mac
Send Inquiry to This Supplier
You May Also Like
-
Industrial Breeding Rabbit Cages System Farm Cage 24/setNegotiableMOQ: 20 Sets
-
Wholesale Small Animal Cages for Automatic Chicken CageNegotiableMOQ: 1 Piece
-
Auto Pet BarrierUS$ 3.13 - 5MOQ: 3000 Sets
-
Pet Travel CaseNegotiableMOQ: 500 Pieces
-
Wire Mesh Pet CageUS$ 30 - 50MOQ: 200 Pieces
-
Biscuit Automatic Online Feeding SystemUS$ 100,000 - 1,000,000MOQ: 1 Set
-
Polyethylene Outdoor Animal Shed or House , OEM ServiceUS$ 50 - 200MOQ: 1 Piece
-
Farm EquipmentUS$ 100 - 2,000MOQ: 1 Set
-
Waterproof Car Pet Seat Cover Car Seat Cover for Pet DogUS$ 4.5 - 5MOQ: 3000 Pieces
-
Wholesale Dog Bag Harness With LeashUS$ 3.5 - 4.1MOQ: 1 Piece
