Professional UV Coating Waterproof Insulation Board / External Wall Decorative Insulation Boards

Product

Performance

Metal Fluorocarbon Painting Decorative Insulation

Board

Decoration

Layer

UV coating decorative board

Water-resistant, fire-resistant, anti-pollution, anti-scratch, anti-abrasion, anti-acid , alkali resistance, impact resistance,UV-Resistance and weather resistance

Precious stone pattern, color, and gloss optional designed; Same using life for indoor use and building, the outdoor life is more than 25 years.

Insulation Layer

EPS insulation layer

(Grade B1)

Heat conductivity ≤0.041.  volume-weight :18kg / m³ with the tensile strength:110--120kpa; volume-weight 20kg / m³ with the tensile strength :140kpa.

XPS insulation Layer

(Grade B1)

Heat conductivity ≤0.030. Volume-weight 25--45kg / m³ & tensile ≥150kpa. Strong compressive resistance.   30-40 years average using life. Excenllent structure load-bearing performance .

Polyurethane insulation board

(Grade B1)

Hard polyurethane with low thermal conductivity, good thermal performance. When the hard polyurethane with the  density of  35 ~ 40kg / m3, thermal conductivity is only 0.018 ~ 0.024w / (m.k), equivalent to  half of the EPS, is the lowest heat conductivity of all the insulation materials .

TPS insulation board

(Grade B1)

Heat insulation thermal conductivity is 0.060W / (m · k) ,it has good tensile compressive strength , impact resistance and stability ; its compressive strength reaches 150-500KPa

Rock wool  (Grade A)

Appearance quality: smooth surface, without prejudice practical scars, stains damaged. Combustion performance: non-combustible. Thermal load contraction temperature: 643 degrees.
Moisture absorption: 3.9%. Organic content: 2.9%.
Rockwool board basic parameters:
Material: rockwool
Apparent density: Rockwool 120 (kg / m3)
Heat conductivity: 0.04 (W / (m.K))
Max operating temperature: 80 (℃)
Specifications: 950,1150 (mm )
Operation standard: GB
Operating temperature: 80 (℃)

Phenolic Foam Board(Grade B Grade A)

Not be melt at high temperatures ,not be softened, with low smoke, non-proliferation flame resistance, flame penetration, There is  no distortion, no burning ,no fire, being placed 10 minutes at 1400 ℃, can effectively prevent the flames and smoke spread

Weather resistance

JF149-2003,

JGG144-2004

After weather resistance test,No damage such as facing layer blistering or falling off,Protective layer hollowing or falling off; No seepage crack appear.

No damage such as facing layer blistering or falling off,Protective layer hollowing or falling off; No seepage crack

JG149-2003,

JGJ144-2004

Impact-resistance strength grade:10

Water absorption  g/㎡,Immersed 24H

JG149-2003,

JGJ144-2004

≤500

21

Wind pressure resistance value   KPa

JG149-2003,JGJ144-2004

Not less than the wind load design value of the project

After 15 kpa level wind load resistance test,,no water seepage

Freezing and thawing resistance

JG149-2003,JGJ144-2004

No surface cracking,hollowing,blistering,

exfoliation

No surface cracking,hollowing,

blistering,exfoliation

Steam flow density g/(㎡·H)

JG149-2003,JGJ144-2004

≥0.8