Paint Mixing Machine Stainless Steel Mixing Tank Open Top Single Layer

Delivery Time:5-6 weeks
Certification:CE ASME GMP ISO9001

Inox 500L 1000L 1500L sanitary polished surface stainless steel mixing tank open top single layer

Specifications

Stainless steel single layer mixing tank is widely used in many kind of fluid industry, different 

mixer can meet different processing demand.Especially in paint, fuel, printing ink, papermaking,

adhesive, chemical,medical etc.

1. According to your product, we can configure with different mixing tool, if low viscosity product, 

   need high speed mixer, if high viscosity product, usually high speed mixer with low speed mixer 

   to meet different process. 

2. To choose the right machine will greatly advance your production efficiency and production quality.

3. The stainless steel mixing tank can engineer heating, cooling or vacuum or other process

4. ELE have rich practical data for different product, with the data can help customer to choose 

    the right machine.

5. The volume of the mixing tank from 50-20000L

6. Material: sus304 or 316L stainless steel

7. the closed structure prevent the dust fly or liquid splash. 

Main technologies

1. Capacity:100L,200L,300L,500L,600L,1000L~5000L and more size .Special tank can be made customered order.
2. Heating form: it adopts heating tubes, inserting into the jacket, to achieve uniform heating, heat transfer oil or water is injected into the jacket as the heating media,thus,the thermal energy is generated to heat the material in the tank
3. Material heating temperature:≤100°c,material heating time:30min-90min(according to the production requirements)
4. Temperature control: it adopts thermocouple and temperature controller to measure and control the temperature, it also can adjust the material temperature up and down.
5. Tank:interal surface are treated by polishing, roughness Ra<=0.4Pm.
6. Top cover: With two easy-open removablecover,convenient to wash,interal surface are treated by polishing, roughness Ra<=0.4Pm.
7. Bottom tank structure angle is formed by metal spinning, no dead space remains after welding,polishing,and no material leaves after releases.
8. Jacket type:fully jacketed, used for injecting into heat transfer oil or water, to achieve the purpose of best warming up  and cooling down during working time.
9. Heat insulating material: it adopts filling pearl cotton, rock wool or polyurethane foaming to keep the temperature range from outside, thus, to achieve the heat insulation and heat preservation purpose. 
10. The shell surface treatment method: mirror polish ,2B primary colors inferior smooth or 2 B grinding surface inferior smooth processing 
11. Agitator: coping centre agitating, lapped joint is adopts to connect speed reducer output shaft and mixing paddle shaft,thus,it\'s easy to wash.  
12. Mixing RPM:15-120r/min
13. Agitator type: gate type, anchor type, paddle type, turbine type (according to the production requirements).
14. Device configuration: electric control box, temperature controller, liquid material import&export,oil spill hole,etc.
15. Material: inner tank is stainless steel 304 or 316L,Jacket:Q235-B or SUS304,outer protection shells:SUS304.
16. Flanging process arc transition is adopted for each import-export pipe orifice and inner tank welding, which makes our products easy to wash.

 Product paremeter

Working Volume(L)	Dimension  (DxH) mm	Total Height  (mm)	Diameter of Inlet  & Outlet (mm)	PU Insulation  (mm)	Motor Power (KW)	Mixing Speed (R/Min)
500	900 x 800	2200	Φ38	50	0.75	ABB/ Siemens  35 -150 Rpm
800	1000 x1000	2400	Φ38	50	0.75
1000	1100 x 1200	2900	Φ38	50	1.1
2000	1300 x 1500	3100	Φ38	50	1.5
3000	1550x 1500	3300	Φ51