High Speed End Mill Tool , Two Flute End Mill CE / TUV Approved 50 - 150mm Length

Delivery Time:5 working days after received your payment
Certification:CE,TUV

High Speed End Mill Tool , Two Flute End Mill CE / TUV Approved 50 - 150mm Length

Advantages

End mill wholesale detials:

a) Ability in high temperature, about 800-10000C can still keep good when the cutting performance, cutting than HSS optional high 4, 8 times the cutting speed.

b) Normal temperature high hardness, good abrasion resistance.

c) Flexural strength low, impact toughness is poor, not the very sharp blade grinding.

d) • 2-flute design with 35 helix produces a good surface finish
    • Coating provides outstanding heat and wear resistance
    • Cutting geometry allows for use in a wide array of materials
    • Standard length, straight shank of our end mill wholesale

 Description:

We use 100%  original raw material, the micro grain tungsten carbide powder and cobalt powder(from German)to make the carbide rod, hardness can be 92.5-94.0(HRA), and T.R.S. is 4200-4800(N/mm2), this carbide rod can ensure the end mills with very strong abrasive resistance and impact strength.

Original raw micro grain material, high hardness and T.R.S. 

   1, Co: 10-12%, WC: 88-90%,

       Grain size: 0.2-0.6μm,

       Hardness: 92.5-94.0 HRA,

       T.R.S.: 4200-4800 N/mm2,

       Density: 14.3-14.8 G/cm3

   2, We got 250T Extruder, 10MPa Overpressure Sintering Furnace-Vacuum

       Dewaxing, these two equipments are very very important for manufacture and high quality carbide rods.

   3, We use our own carbide rod for 90% of cutting tools. 

   4, We have introduced advanced CNC grinding machines in operating,Rollomatic,Schneeberger from Switzerland, ANCA from Australia, Zoller from German,KEYENCE from Japan,set  up(Japan FANUC, brother processing center) tool laboratory   test cut.Our technology from Taiwan.Guarantee high precision and good performance.

   5, Helix Angle: 38-42 °(we could do 4 of them are 37°)

         Diameter of cutting edge: 1-25mm

         Diameter of rods: 4-25mm

         Length: 50-150mm

         Cutting Form: Ball nose, Corner Radius, Taper Flute, etc.

         Flutes No.: 2-6

Super coating

     TiSiN  TiAlN  AlTiN or TiCN ,

     improve tool life, reduce the coefficient of friction.

 Applications:

    Copper, Aluminium Alloy , Cast Iron, Carbon steel, Tool steel,

    Mould steel, Die steel, Stainless steel, Plastic, Arcylic, etc. 

 Price Performance Ratio:

   From tungsten powder to end mills, that\'s the reason of our competitiveness!

   Make sure about each piece end mill has a good quality,high precision and good performance.

   More discount will be offered according to exact quantity.

   Welcome to be our agents, OEM is also available.

Specifications:

Model NO.	Diameter/D1	Flute Length/L1	O.A.L/L3	Shank Dia/D2
JT2010	1.0	3	50	4
JT2012	1.2	3	50	4
JT2015	1.5	4	50	4
JT2015-75	1.5	4	75	4
JT2020	2.0	5	50	4
JT2020-75	2.0	5	75	4
JT2025	2.5	7	50	4
JT2025-75	2.5	7	75	4
JT2030-3	3.0	8	50	3
JT2030	3.0	8	50	4
JT2030-75	3.0	8	75