Contact Platform Support
Help CenterGSM Channel Bank(Imei Changing Automaticaly)
Related Products
-
Good Indutrial Module With Good Voice Quality GSM GatewayUS$ 40 - 45MOQ: 1 Piece -
High Quality With Good Voice Quality 8 Ports GSM Fixed Wireless TerminalUS$ 470 - 500MOQ: 1 Piece
-
TYT Smarthome Gateway / Home Applainces Remote Comtroller in Zigbee Coordinator SystemUS$ 59 - 139MOQ: 1 Square Inch
-
Serial Wifi Module Wire Ethernet PCB Antenna Transparent Transmission WF-01US$ 1 - 10MOQ: 10 Pieces
-
External 3G Gsm Modem Pool 8 Port Speaker/call Sending Bulk SMS MMSUS$ 345 - 500MOQ: 1 Piece
GSM channel bank 8 ports 32 sims
1)line reversal by polarity/12kz/16k
2)bill router by dials times and talking times
rotation...
The design of the ETROSS-8888 FWT is to supply a standard sound phone in the area of the GSM Cell Network covering.
The interface board of the ETROSS-8888 FWT supply a clear bond between standard phone or a VoIP GATEWAY or A PBX and GSM Cell Network it possesses the function of the emulation phone exchanger and supply:
Dialing tone
DTMF Dialing
Caller ID
Bell signal
Polarity reversal
The RJ-11 socket which connect the phone or the payment
Antenna socket (FME)
IP usage switch
Working state indicator
Signal Strength indicator
2. Configuration and installation
1). ETROSS-8888 Fixed Wireless Terminal package list:
Fixed Wireless Terminal(mainframe) 1PCS
850/1900/1800/900MHz antenna(FME) 1PCS
Users Guide 1PCS
+12V power supply 1PCS
Certificate 1PCS
Data cable (optional) 1PCS
Double core telephone line 1PCS
2). Installation Steps:
The equipment adopt digit GSM network communication mode, it need effective SIM card.
Install the Fixed Wireless Terminal in a suitable place.
Turn off the power at the back of the unit.
Install effective SIM card.
A) Take off the screw of the SIM card cover at the back of the unit
B) Open the SIM card cover.
C) Move the SIM card clamp according to the arrow.
D) Lift the SIM card clamp to insert the SIM card
E) Press the SIM card clamp and move it to firm
Close the SIM card cover then wring the screw.
Input the antenna into the socket.
Plug the end of the conjunction line of the phone(payphone) into the RJ-11 socket of the FWT and connect the other end to the phone(payphone).
Send Inquiry to This Supplier
You May Also Like
-
RF DIN 7/16 Attenuator 50W 3dB/6dB/10dB/20dB/30dB/40dB/50dBNegotiableMOQ: 1 Piece
-
2015 New Stylish Optical Bluetooth Transmitter for Smartphone ,laptopUS$ 11 - 13MOQ: 1000 Pieces
-
UM220-III NUS$ 0.1 - 1MOQ: 1 Piece
-
2.4G WIFI/Bluetooth Internal FPC Antenna FR4 Antenna PCB Wifi Patch Antenna With IPEX UFL ConnectorUS$ 0.48 - 0.7MOQ: 100 Pieces
-
Bluetooth Audio Module RS232 Serial Bluetooth Module HC-06 Adapter Communication Master-Slave 2 Modes MINI USBUS$ 1 - 100MOQ: 100 Units
-
RIGHT ANGLE f QUICK MALE RF CONNECTORUS$ 0.01 - 0.99MOQ: 1000 Pieces
-
High Strength FRP RadomeNegotiableMOQ: 100 Pieces
-
GSM ModemNegotiableMOQ: 1 Unit
-
Telecommunication EquipmentUS$ 0.5 - 5MOQ: 500 Pieces
-
Antenna Manufacturer 5.8GHz 5dBi High Performance Desktop Rubber Duck Indoor Router WiFi AntennaNegotiableMOQ: 2000 Pieces
