Contact Platform Support
Help CenterWaterproof Metal Magnetic Loop Detector For Barrier Gate Of Parking Tolling System
Related Products
-
Industrial Automatic Magnetic Loop Detector / Inductive-Loop Traffic DetectorsNegotiableMOQ: 1 Kilogram -
Magnetic Ground Vehicle Loop Detector For Garage Or Gate Opener , 4 LayoutNegotiableMOQ: 1 Kilogram
-
Barrier Gate Magnetic Loop Detector Car Detection Sensor With Dual ChannelNegotiableMOQ: 1
-
Portable Electronic Single Channel Inductive Loop Vehicle DetectorNegotiableMOQ: 1 Piece
-
Automatic Access Control Car Parking System Inductive Loop Vehicle DetectionNegotiableMOQ: 1 Piece
Delivery Time:2~3 working days
Certification:ISO 9001:2008,CE,Rohs
Waterproof Metal Magnetic Loop Detector For Barrier Gate Of Parking Tolling System
Description:
PD132 should be installed in a convenient weatherproof location as close to the loop as possible. Installation location must choose to stay away from the heat source; it around other devices must maintain a distance of at least 10mm (must not installation close with boxes wall). A correct loop configuration and detector installation will ensure a successful inductive loop detection system. Loop of several important parameters include: loop figure, size, turns, install methods.
Operation and Indication
While the detector is tuning, the green Channel LED and red Power LED will be turn on. It remain about 2 seconds, then the green LED turn off. If a loop fault exists the Channel LED will come on and flash indicating a fault. If the fault is self-healing the detector will continue to operate. The green channel LED will also glow whenever a vehicle is detected passing over the inductive loop. The red Power LED at the top of the unit will remain on to indicate that the unit is powered.
Application:
Gate Opener
Traffic light
Vehicle monitor
Highway toll system
Parking lots toll system
Specifications:
Operating voltage: |
220V AC(Default, or 110VAC) |
Power Consumption: |
<5W |
Output : |
Relay Output |
Frequency range: |
20 KHz to 170 KHz (4 grades adjustable) |
Reaction time: |
10ms |
Signal holding time: |
Unlimited / limited 10 minutes when loop is permanently covered |
Sensitivity: |
3 grades |
Loop inductance: |
Ideal 100μH to 300μH (include connecting wiring) |
Max 50μH to 1000μH (include connecting wiring) |
|
Loop Wiring: |
Max. 100m, twisted at least 20 times per meter, total resistance <10 Ohm |
Auto correcting time: |
1s to 2s |
Operating temp: |
-30℃ to +70℃ |
Storage temp: |
- 40℃ to + 85℃ |
Relative humidity: |
≤ 95% |
Dimensions: |
78×40×108 mm (L×W×H) (include socket ) |
Net Weight: |
340g(include socket) |
Dimensions |
78x40x108 mm |
Send Inquiry to This Supplier
You May Also Like
-
Metal Detector Induction Vehicle Loop Detector For Car Parking SystemNegotiableMOQ: 1 Meter
-
Parking Gate Single Loop Detector Car Detection Sensor With 10 Sensitivity GradeNegotiableMOQ: 1 Piece
-
Frequency Induction Magnetic Loop Detector Alarm / Gate Loop DetectorNegotiableMOQ: 1
-
Car Emergency Gate Inductive Loop Vehicle Detector Traffic Light SensorsNegotiableMOQ: 1 Piece
-
Access Control RFID Card Dispenser Issuing Machine With Car ReaderUS$ 0 - 150 /MOQ: 1 Piece
-
Train Station Ticket Collecting Machine For Highway Card Issuing SystemUS$ 0 - 150 /MOQ: 1 Piece
-
Fast Auto Ticket Dispensing Machine And Card Collector Parking SystemUS$ 0 - 150 /MOQ: 1 Piece
-
3M Ffid Uhf Card Reader Long Range Ethernet With Rj45 For Card Access SystemNegotiableMOQ: 1 Piece
-
Automatic Magnetic Single Loop Detector / Loop Sensor With Gate OpenerNegotiableMOQ: 1 Piece
-
Handheld Parking RFID Card Dispenser Machine , Smart Card CollectorUS$ 0 - 150 /MOQ: 1 Piece
