- Sunny Steel PipeFitting Industires
- Main products: pipe fitting, ASTM A335 alloy pipe, Bi-metal clad pipe, Ceramic lined pipe, Elbow fittings
Home > Products > New product > Spectacle Blind Flanges
Spectacle Blind Flanges
Negotiable
/ Piece
1 Piece(Min.Order)
- 0 Piece / Pieces per Month
- T/T L/C D/P D/A
- 7 days
You May Like
Product Description
Spectacle Blind Flanges
-
Separating one part of a line from another requires a spectacle blind, able to switch from closed to open and back again. Bleed rings provide a means to release pressure from the pipe through a controlled opening.
- Stainless Steel: ASTM A182 F304/304L, F316/316L, F316H,F316Ti,F321,F44(UNS S31254)
- Alloy Steel: ASTM A182 F1,F5/a,F9,F11,F12,F22,F91
- Duplex&Super Duplex Steel: ASTM A182 F51/UNS S31803,F53/UNS S32750 F55/UNS S3260
- Special Alloy Steel: Monel400,Inconel 600, Inconel 625, Inconel 800, Inconel 825
- Ideal for higher pressure and temperature applications for small pipe sizes
-
Not recommended for larger loads, especially when subjected to higher torque
- Threaded flanges can be fitted to pipes of various sizes without welding and this is one chief benefit for which these flanges are highly demanded.
- They can be used in extremely high pressure applications, particularly at or near atmospheric temperature, where the necessary post weld heat treatment is not possible.
- They are ideal for small diameter piping applications.
- They are economical and time saving devices.
- These threaded flanges are normally designed for non-cyclic applications.
- The flanges are suitable to be used in applications where welding is hazardous.
- They can be used in highly explosive areas.
- Can be attached to the pipe without welding (sometimes an additional seal weld is used as well)
- Special Alloy Steel: Monel400,Inconel 600, Inconel 625, Inconel 800, Inconel 825
- Ideal for higher pressure and temperature applications for small pipe sizes
-
Not recommended for larger loads, especially when subjected to higher torque
- Threaded flanges can be fitted to pipes of various sizes without welding and this is one chief benefit for which these flanges are highly demanded.
- They can be used in extremely high pressure applications, particularly at or near atmospheric temperature, where the necessary post weld heat treatment is not possible.
- They are ideal for small diameter piping applications.
- They are economical and time saving devices.
- These threaded flanges are normally designed for non-cyclic applications.
- The flanges are suitable to be used in applications where welding is hazardous.
- They can be used in highly explosive areas.
-
Carbon Steel: ASTM A105, A350 LF1,LF2 CL1/CL2 LF3 CL1/CL2, ASTM A694 F42,F46,F48,F50,F52,F56,F60,F65,F70
- Stainless Steel: ASTM A182 F304/304L, F316/316L, F316H,F316Ti,F321,F44(UNS S31254)
- Alloy Steel: ASTM A182 F1,F5/a,F9,F11,F12,F22,F91
- Duplex&Super Duplex Steel: ASTM A182 F51/UNS S31803,F53/UNS S32750 F55/UNS S3260
- Special Alloy Steel: Monel400,Inconel 600, Inconel 625, Inconel 800, Inconel 825
- Ideal for higher pressure and temperature applications for small pipe sizes
- Not recommended for larger loads, especially when subjected to higher torque
- Threaded flanges can be fitted to pipes of various sizes without welding and this is one chief benefit for which these flanges are highly demanded.
- They can be used in extremely high pressure applications, particularly at or near atmospheric temperature, where the necessary post weld heat treatment is not possible.
- They are ideal for small diameter piping applications.
- They are economical and time saving devices.
- These threaded flanges are normally designed for non-cyclic applications.
- The flanges are suitable to be used in applications where welding is hazardous.
- They can be used in highly explosive areas.
- Can be attached to the pipe without welding (sometimes an additional seal weld is used as well)
- Special Alloy Steel: Monel400,Inconel 600, Inconel 625, Inconel 800, Inconel 825
- Ideal for higher pressure and temperature applications for small pipe sizes
- Not recommended for larger loads, especially when subjected to higher torque
- Threaded flanges can be fitted to pipes of various sizes without welding and this is one chief benefit for which these flanges are highly demanded.
- They can be used in extremely high pressure applications, particularly at or near atmospheric temperature, where the necessary post weld heat treatment is not possible.
- They are ideal for small diameter piping applications.
- They are economical and time saving devices.
- These threaded flanges are normally designed for non-cyclic applications.
- The flanges are suitable to be used in applications where welding is hazardous.
- They can be used in highly explosive areas.
-
Separating one part of a line from another requires a spectacle blind, able to switch from closed to open and back again. Bleed rings provide a means to release pressure from the pipe through a controlled opening.
-
Carbon Steel: ASTM A105, A350 LF1,LF2 CL1/CL2 LF3 CL1/CL2, ASTM A694 F42,F46,F48,F50,F52,F56,F60,F65,F70
- Stainless Steel: ASTM A182 F304/304L, F316/316L, F316H,F316Ti,F321,F44(UNS S31254)
- Alloy Steel: ASTM A182 F1,F5/a,F9,F11,F12,F22,F91
- Duplex&Super Duplex Steel: ASTM A182 F51/UNS S31803,F53/UNS S32750 F55/UNS S3260
- Special Alloy Steel: Monel400,Inconel 600, Inconel 625, Inconel 800, Inconel 825
- Ideal for higher pressure and temperature applications for small pipe sizes
- Not recommended for larger loads, especially when subjected to higher torque
- Threaded flanges can be fitted to pipes of various sizes without welding and this is one chief benefit for which these flanges are highly demanded.
- They can be used in extremely high pressure applications, particularly at or near atmospheric temperature, where the necessary post weld heat treatment is not possible.
- They are ideal for small diameter piping applications.
- They are economical and time saving devices.
- These threaded flanges are normally designed for non-cyclic applications.
- The flanges are suitable to be used in applications where welding is hazardous.
- They can be used in highly explosive areas.
- Can be attached to the pipe without welding (sometimes an additional seal weld is used as well)
- Special Alloy Steel: Monel400,Inconel 600, Inconel 625, Inconel 800, Inconel 825
- Ideal for higher pressure and temperature applications for small pipe sizes
- Not recommended for larger loads, especially when subjected to higher torque
- Threaded flanges can be fitted to pipes of various sizes without welding and this is one chief benefit for which these flanges are highly demanded.
- They can be used in extremely high pressure applications, particularly at or near atmospheric temperature, where the necessary post weld heat treatment is not possible.
- They are ideal for small diameter piping applications.
- They are economical and time saving devices.
- These threaded flanges are normally designed for non-cyclic applications.
- The flanges are suitable to be used in applications where welding is hazardous.
- They can be used in highly explosive areas.
Contact Us
- Sunny Steel PipeFitting Industires
- Contact nameSam Xu Chat Now
- Phone86-21-33780199
- AddressNo. 273, Siping Road, Shanghai, 200081, China
Product Categories
| Composite pipe | New product | Pipe fittings | pipe flange |
| pipe valve | Special alloys | steel pipe | Alloy steel pipe |
New Products
-
U Bend tube
-
Abrasion resistant ceramic lined pipe
-
Ceramic Lined Elbows and Bends
-
Bi Metal Clad Pipe, Bend
-
Honed Tubes for Hydraulic, Pneumatic Cylinder
-
Carbon Steel Pipes
Popular Searches
- sanitary fittings
- pipe fitting
- Compressed Air Pipe
- socket fusion
- socket fusion welding
- copper fitting
- Red Copper Pipe
- brass fitting
- Fire Hose Coupling
- sanitary fitting
- plumbing
- Expansion Joint Flange Epdm
- ferrule
- Pex Al Pex Pipe
- expansion joint
- fire coupling
- Gas Fireplace Part
- Stove Accessory
- hdpe fitting
- Hourglass Aluminum Ferrule
- Copper Pipe Fitting
- cast pipe
- cast iron tube
- astm a888
- ductile iron fitting
- en877
- cast iron fitting
- union
- Ductile Cast Iron Pipe
- wire ferrules
Recommended Products
- Furniture Feet Fencing Tube Chair Plastic Insert End Cap Stainless Steel Pipe End Cap
- HDPE BUTT FUSION EQUAL DIAMETER 90-DEGREE ELBOW
- HDPE BUTT FUSION REDUCING TEE
- HDPE BUTT FUSION EQUAL TEE
- HDPE BUTT FUSION REDUCER COUPLING
- PVC Pipe Covers Round Female Threaded Plastic Dust Cap Copper Aluminum Pipe End Cap
- PVC Threaded 4 Inch 3 Inch 8 Inch Female End Cap Plastic Pipe Cap Pvc
- MOCAP BSP NPT Metric Pipe Corrosion protection Plug
- Metric BSP NPT Male Threads Protector Tubular Carbon Steel End Cap Pipe Cover
- Pipe Fitting Wide Flange Tapered Plastic Anti-dust Proof Hydraulic Hose Swivel Ends Cap Plug
- 40X40 Square Plastic End Cap Plug for Steel Tube End Cap Pipe End Cap square
- Chair School Desk Legs Black Angled square Plastic End Caps Plugs
Find Similar Products By Category
- Mechanical Parts & Fabrication Services > Pipe Fittings
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now
Sunny Steel PipeFitting Industires
AIBot OnlineThis conversation is AI-generated. Contact manufacturer before transaction to confirm info.
-
Sam Xu
Welcome to my shop, I'm glad to serve you. Please feel free to send me any questions you may have.
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile