600ml 1:1 Stainless Steel Rod Manual Epoxy Caulking Gun 1.08kg / Piece

University Cartridge: two-component ( 600ml 1:1 )

Material: Reinforced Nylon frame, Stainless Steel Rod

Weight: 1.08kg / piece

Instruction:

1 Open the top of the dispenser and then pull the rack to reach the maximum. 
2, Put into impression material cartridge, and lock it by the dispenser.
3, Promote the trigger to make the impression material come out smoothly from the cartidge
4, After using, put the rack back to the original location. 
5, Remove the cartridge, then to repeat the above operation.

Function:

No need Power and Air Pump. It is completely operated by hand, leggiere-design and easy to be taken. It is used for catalyst with mixing impression materials, silica gel or self-solidifying compound resins etc. The ratios of dispensing guns include 1:1/2:1, 4:1/10:1, with cream-colored gun body and black push rod. Two-component dispensing guns can avoid pollution when it is used for mixing adhesives, fast-occlusion silica gel and various impression materials.

University for using materials as following:

· Epoxies, Acrylics, Silicones, Polyesters.

  Epoxy Acrylates, Hybrids, Urethanes.

· Polysulfides, foams, Polymers, Polyureas

Suggested Application on Fields:                  

· Construction, Concrete, Industry, Hardware, Anchor&Fastener, Waterproof

· Auotmative, Railway, Tunnel, Appliances, Aerospace, Maintenance and Repair

· Marine, Floor, Chemical, Paint etc. 

Packing & Shipping                                       

Packaging: Master Carton or to be customized.

Package:10pcs / carton Inner packing: 385mm*200mm*115mm Outer packing: 630mm*385mm*410mm

.