Home > Products > Automatic Slitting Machine > High Speed And Automatic Slitting Machine With CR / HR / SS / PPGI 120m/min
High Speed And Automatic Slitting Machine With CR / HR / SS / PPGI 120m/min
- 0 Piece / Pieces per Month
- T/T L/C D/P D/A
- 7 days
Product Details
Brand Name: | BZ | Place of Origin: | China | Model Number: | ZJX-2X1600 |
Product Description
High Speed And Automatic Slitting Machine With CR / HR/ SS / PPGI 120m/min
Application:CR/HRC/stainless steel /galvanized thickness of coil plate:0.3-2mm width of coil plate:1600mm coil weight:15MT(max) line speed:0-120m/minSpecifications:
Automatic slitting machine ----ZJX-0.5-4X1600mm ia full automatic slitting line is used for slitting the carbon steel, stainless steel, CR /HR /PPGI into strip coils to prepare for the next process.
Application: |
CR/HRC/stainless steel /galvanized and so on |
thickness of coil plate: |
0.3-2mm |
width of coil plate: |
1600mm |
coil weight: |
15MT(max) |
coil I.D: |
ф508 |
coil O.D: |
ф1600mm |
the diameter of slitting blade shaft |
ф180 |
slitting blade: |
φ180Xφ320X20 |
material of slitting blade: |
6Crw2Si |
the hardness of slitting blade: |
HRC58°-60° |
recoiler I.D: |
φ508 |
power: |
380V/50Hz/3Ph |
tolerance of width error: |
≤±0.05mm/2M |
line speed |
0-120m/min |
area of the whole machine: |
30m(L)x6m(W) |
Production orientation |
from left to right |
1. Hydraulic entry coil car
◆Automatic slitting machine entry coil car can move levelly and vertically, which is convenient for putting the steel coils into the de-coiler.
◆It is driven vertically by hydraulic cylinder with four guide pillars.
◆The level movement is driven by 1.5KW cycloidal motor.
2. Hydraulic cantilever un-coiler
◆ Automaticslitting machine uncoiler is used to supporting steel rolls and uncoiling.
◆It can expand and shrink with hydraulic oil cylinder and fit with the inner hole of the steel coils and is equipped with supporting stand.
◆Moment motor drives the coils running and the motor can run right and left to prevent the coils running by inertia.
3. Hydraulic press and pinch and feed device
◆Automatic slitting machine press and pinch device adopts two hydraulic oil cylinders control the lifting of rollers.
◆Hydraulic telescopic shovel and hydraulic press and hit the head device, etc to feed the plate.
◆Hydraulic pinch and feed device: driven by the cycloid pinwheel decelerator and equipped with hand clutch. The pinch rollers adopt the hydraulic oil cylinder to press down. It is driven by down rollers.
4. Hydraulic head-cutting machine
◆Automatic slitting machine head cutter machine adopts two columns structures, a press device, can cut the 4mmX1600 steel plates;
◆The up and down blades which are alloy material 9CrSi can adjust their gap;
◆The machine is used for the steel shear and to make the plate easy to slitting machine.
5. Looper Ⅰ
◆Automatic slitting machine looper is composed of the pit and the bridges which is used to create a buffer zone to control the front and back speed.
6. Side guide device
◆Automatic slitting machine side guide device is located before slitter which uses the vertical rollers of both sides to guide the plates into the slitting machine correctly.
◆The guide rollers are adjusted by the rods on both sides . The width range is 500-1600mm.
◆It is equipped with the hydraulic press and damping device to make sure the slitting precision.
7. Slitting machine
◆Slitter is the most important part of the holw automatic slitting machine line. Power part: This is composed of power-stand, decelerator, 45KW direct current motor, gear distributing case, coupler, spindle, connecting-cover, etc.
◆Host machine: This is composed of bottom-stand, fixed bracket, big slide, knife pivot (φ180mm, 2pcs), movable bracket, slide, the front and back adjustable device of bracket, knife pivot lifting and pressing down adjustment device, accompany of blade, separating cover, rubber band and 10 blades with the machine.
◆It change the blades through moving out the bracket hydraulically and is very convenient and fast.
8. Scrap winder
◆It consists of base, the shaft and plate of scr
Contact Us
- China Coil Slitting Machine Online Market
- Contact nameMr. Mak
- Phone86-755-88189785
- AddressAode Industry Park, Nanming Road Hangzhou,Zhejiang
Air Filter Making Machine | Automatic Slitting Machine | Slitting Line Machine | Steel Coil Slitting Line |
- SiC Ingot Manufacturer for laser cutting testing
- 600um SiC slicing wafer Manufacturer As-cut SiC substrate factory
- Unpolishing 8 inch SiC substrate manufacturer As-cut SiC wafer
- 6 inch As-cut SiC wafer manufacturer with lowest MPD
- 4 inch 4H-N As-cut SiC wafer manufacturer Unpolished SiC Substrate
- PFA manual diaphragm valve PMDV
- PFA pneumatic diaphragm valve PFDV
- PFA pneumatic diaphragm valve PFDV
- PFA plug valve PPV
- PFA needle valve PNV
- Tetrafluoro one-way valve (check valve) TCV
- PFA welding four-way WCA
Popular Searches
- p-type semiconductor
- thermoelectric generator module
- Thermoelectric Chip
- teg thermoelectric generator
- high temperature thermoelectric generator
- active cooling modul
- christmas wafer with cream
- poly silicon target
- poly silicon wafer
- pro tec
- price wafer
- peltier thermoelectric cooler 12v
- thermo electric cooler
- animal wafer
- battery wafer
- broken silicon wafer
Find Similar Products By Category
- Electronic Components & Supplies > Electronic Accessories & Supplies > Semiconductors
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Mr. Mak
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-