Hydraulic Bottle Extrusion Blow Molding Machine With Screw Diameter 90 Mm

Hydraulic Bottle Extrusion Blow Molding Machine With Screw Diameter 90 Mm

Main Features:
 

1) Electrical control system: The machine works under the PLC control(made by the Mitsubishi Co. of Japan) via a man-and-machine interface(displayed in Chinese version or in English version).The machine is equipped with a modularized temperature controller and operated through a touch-type coloure screen.All the production data can be set up,modified,searched and monitored and the machine trouble diagnosis can be completed both on the touch-type screen.The electric elements work on the non-contact working principle,thus being durable in service life.
2) Hydraulic system:The machine works under the proportional pressure control. The machine is equipped with hydraulic valves and hydraulic pumps imported from world-famous companies,thus assuring consistent and reliable working performance.
3) Plasticizing system:The high performance screw used on the machine assures thorough and homogeneous plasticization and mixing of plastics.
4) Speed regulation system:Frequency-converter-controlled speed regulator + speed change gearbox with hardened alloy steel gears.Speed regulation can be completed smoothly with less noise generated.Therefore the machine is durable in service life.
5) Mould opening,closing & moving system:A big 3-point central beam mechanism for opening & closing the mould halves and locking the mould assures balanced distribution of locking force and is free of any deformation after long-time operation.The mould is horizontally moved on linear spherical ball guideways at high traveling accuracy and rapid speed and with less resistance.
6) Air-bolowing needle bracket:The air-blowing needle bracket is of solid L-square design.The sturdy bracket assures smoothness of the product cut.

Machine main components adopt world famous brand, e.g.:
• PLC: MITSUBISHI (JAPAN),
• SCREEN: DELTA (TAIWAN)
• CONDUCTOR: SCHNEIDER(FRANCE)
• AIR SWITCH: MERIINGERIN (FRANCE)
• TRANSDUCER: DELTA (TAIWAN)
• POWER RESOURCE: MEAN WELL(TAIWAN)
• OIL PUMP: YUKEN (JAPAN)
• VALVE: YUKEN (JAPAN)
• SOLENOID VALVE: AIRTAC(TAIWAN)
• PARISON CONTROL SYSTEM: MOOG(JAPAN)
• OIL PIPE, JOINT: LIANHUI(TAIWAN)

Specifications:

HSTII-12L EBMM Technical Parameters
Max Product Volume	(L)	12
Working station	-	2
Screw Diameter	(mm)	90
Screw L/D ratio	(L/D)	22~30
Screw drive power	(KW)	37~45
Screw heating capacity	(KW)	7.3~9.1
No.of heating zone	(ZONE)	4~4
Output of HDPE	(kg/h)	130~160
Output of PVC	(kg/h)	105~125
Oil pump drive power	(KW)	11
Clamping force	(KN)	110
Platen distance	(mm)	240~620
Max.Size of Mold	(W×H)(mm)	530×510
Capacity	(L)
Max.Die diameter	(mm)	220