Electrical Extrusion Blow Molding Machine For 5L Plastic Products

Electrical Extrusion Blow Molding Machine For 5L Plastic Products

Main Features:
 

1) Electrical control system: The machine works under the PLC control(made by the Mitsubishi Co. of Japan) via a man-and-machine interface(displayed in Chinese version or in English version).The machine is equipped with a modularized temperature controller and operated through a touch-type coloure screen.All the production data can be set up,modified,searched and monitored and the machine trouble diagnosis can be completed both on the touch-type screen.The electric elements work on the non-contact working principle,thus being durable in service life.
2) Hydraulic system:The machine works under the proportional pressure control. The machine is equipped with hydraulic valves and hydraulic pumps imported from world-famous companies,thus assuring consistent and reliable working performance.
3) Plasticizing system:The high performance screw used on the machine assures thorough and homogeneous plasticization and mixing of plastics.
4) Speed regulation system:Frequency-converter-controlled speed regulator + speed change gearbox with hardened alloy steel gears.Speed regulation can be completed smoothly with less noise generated.Therefore the machine is durable in service life.
5) Mould opening,closing & moving system:A big 3-point central beam mechanism for opening & closing the mould halves and locking the mould assures balanced distribution of locking force and is free of any deformation after long-time operation.The mould is horizontally moved on linear spherical ball guideways at high traveling accuracy and rapid speed and with less resistance.
6) Air-bolowing needle bracket:The air-blowing needle bracket is of solid L-square design.The sturdy bracket assures smoothness of the product cut.

Specifications:

HSTII-5L EBMM Technical Parameters
Max Product Volume	(L)	5
Working station	-	2
Screw Diameter	(mm)	60,70,80
Screw L/D ratio	(L/D)	22~30
Screw drive power	(KW)	18.5~22~30
Screw heating capacity	(KW)	5.04~6.7~6.7
No.of heating zone	(ZONE)	3~4
Output of HDPE	(kg/h)	65~80
Output of PVC	(kg/h)	70~85
Oil pump drive power	(KW)	7.5
Clamping force	(KN)	60
Platen distance	(mm)	148~508
Max.Size of Mold	(W×H)(mm)	370×390
Capacity	(L)
Max.Die diameter	(mm)	145
Die heat capacity	(KW)	2.5
No.of heating zone	(ZONE)	3
Central distance of bi-die	(mm)	160