The iron and manganese removal filter for groundwater,well water

The iron and manganese removal filter for groundwater/manganese sand filter

Iron rust remover/ iron removal water filter/iron and manganese removal

Iron removal filter/iron rust

1.

iron and manganese water purifier is also widely used in the treatment of deep well water, the pre-treatment of mineral water and pure water, the early stage water treatment of terrestrial heat engineering (such as hot spring, etc) and swimming pool engineering

2.Iron and manganese removal filter Principle

 Iron and Manganese Removal Unit utilizes the oxidation method to oxidize the low valence iron ion and manganese ion to high valence ions which will be removed by absorption and filtration so as to achieve the purpose of to reduce iron and manganese content in water.

 3.Iron and manganese removal filter Specifications

 1.Treatment effect
Iron content≤0.3mg/L  
Manganese content≤0.1mg/L
Effluent turbidity<5mg/L

2.Inlet water quality
Iron content≤20mg/L 
Manganese content≤3mg/L   
influent water turbidity<15mg/L
alkalinity≤2mg/L
PH: 5.5
water temperature: 6-10   
working pressure < 0.6Mpa

4.Iron and manganese removal filter Features

Groundwater removal iron and manganese filter is a highly efficient energy-saving water treatment equipment, which jointly developed by our company and the University of Austrian environmental technology.
1.Aeration part: You just need to fill a small amount of air, not to dosage pharmaceutical and catalyst in aeration tank and aeration tower, which can reduce operating costs.
2.The main body of equipment combined with strong oxidation, separation desander, group-type suspension filtration and other processes into one device. The structure is unique.

phone:0086-13812211043,fax0086-510-87996211,email:wo12883@126.com