Contact Platform Support
Help CenterGrit 220 Glass Silicon Carbide Sanding Belts / WEEM Abrasives
Related Products
-
Silicon Carbide Grit 150 Abrasive Sanding Belts With AntistaticNegotiableMOQ: 1 Set -
Segmented Metal Silicon Carbide Sanding Belts For Heavy Duty SandingNegotiableMOQ: 1
-
Silicon Carbide Grit 100 Sanding Belts Abrasives For Panel IndustrialNegotiableMOQ: 1 Set
-
Cloth Backed Segmented Silicon Carbide Sanding Belts On Wide PanelsNegotiableMOQ: 1 Set
-
Zirconia Alumina Sanding Belts / Grit P24-P180 Wide Sanding BeltNegotiableMOQ: 1 Piece
Grit 220 Glass Silicon Carbide Sanding Belts / WEEM Abrasives
Quick Detail:
WEEM R1126 wide belts are built with durable Y weight waterproof polyester backing, close coated sharp silicon carbide gains, and anti-static treatment.
Description:
Our WEEM R1126 wide belts are early production for panel and board sanding. It is built with sharp, fast cut silicon carbide gain, resin over resin, close coated on durable y weight waterproof polyester backing. In panel and board sanding, usually MDF, HDF and Particle board, loading problem or clone problems are often occurred. Anti-static treatment is used on the backing to prevent, delay loading problem.
Silicon carbide is a very hard and crystal structure produces a fine straight edged grind lines. It is superior for its ability to penetrate with light cutting pressures. SiC is primarily used for grinding nonferrous materials such as brass, copper, bronze, and wood, glass, rubber and plastics. It is also used to finish polyurethanes, primers, lacquers and sealers. We chose premium silicon carbide gains for WEEM R1126.
A closed coat product has a higher number of abrasive cutting points per square inch and results in higher stock removal rate and longer time before the abrasive wears out. Normally results in a better finish.
A strong bi-direction tape splice is used. Joint of WEEM 1128 wide sanding belts offer 4 types of joints
Tap on gain line joint: as default.
Tap on gain zizag joint:
Tap on butt line joint:
Tap on butt zizag joint:
Applications:
Woodworking /MDF/HDF/OSD/Partial board/Chip board/Glass/metal
Specifications:
|
Backing: |
Y weight waterproof polyester |
|
Treatments: |
Anti-static |
|
Coated: |
Close coated |
|
Bond: |
Resin over resin |
|
Grain: |
Silicon Carbide |
|
Grit: |
P36~P220 |
|
Width: |
1000mm/39” ~ 1380mm/54” |
|
Length: |
Customer specific |
Competitive Advantage:
It is made for wide belt sander, such as: Steinemann, Imeas, Sofuma etc. Maintain economic sanding belts and good performance.
Send Inquiry to This Supplier
You May Also Like
-
RETOP Portable Inverter Air Plasma Cutter Machine Maximum Cutting Thickness up to 15mm With Built In Air PUMP CUT-45PRONegotiableMOQ: 1
-
Remax-1325 Nice CNC Plasma Cutting MachineUS$ 8,000 - 12,000MOQ: 1 Set
-
SUDA PLASMA CUTTING MACHINE FOR METAL CUTTING ---VP1630NegotiableMOQ: 1 Set
-
China Best Low Temperature Rotating Plasma TreaterUS$ 5,500 - 7,000MOQ: 1 Unit
-
Inverter DC Air Plasma Cutting Machine 380V 60AUS$ 6,000 - 10,000MOQ: 1 Set
-
Plasma Metal Cutting Machine Cnc China Cnc Milling MachineUS$ 9,000 - 13,000MOQ: 1 Set
-
Servo Plasma Cutter for ss 2012 Factory Hot Seller JOYUS$ 5,000 - 8,000MOQ: 1 Set
-
EVO20 CUT80 SC L2S62 3-Phase Plasma CutterNegotiableMOQ: 10 Units
-
Shanghai Donsun Welding Group Built in Air Pump Built in Water Tank High Power Plasma Cutting LGK-200L/200NL/300L/300NLUS$ 900 - 1500MOQ: 1 Set
-
LGK 80 Inverter Welders Portable Plasma Cutter Including Built-in & External Air Compressor and MMA WelderUS$ 420 - 423MOQ: 1 Piece
