DXB-180 / DXB-240 suspending scaffold self Climbing Formwork system for single-sided walls

DXB-180 / DXB-240 suspending scaffold self Climbing Formwork system for single-sided walls 1. DXB-180 & DXB-240 Climbing Formwork
2. suitable for dam, high building (100 meters high)
3. can stick to the concrete tight

 Introduction:

Single-side climbing formwork DXB-180 & DXB-240 are based on the DP-180 & DP-240 system, which are in similar structure. DXB-180 & DXB-240 are mainly used in concrete pouring of dam, pier, guy anchor, concrete protecting wall, tunnel, underground workshop and so on. Because the concrete lateral pressure is entirely supported by anchor system and bracket, the wall-through tie-rods and additional reinforcement are not needed. The construction is easy, rapid and economical; the surface of the concrete is smooth. They are perfect formwork systems for single-sided walls.

DXB180                                                                                                                                           

The Adjustment Of Inclination(DXB-180 system can be inclined by adjusting pull-push prop.The maximum angle is 30°)

1	formwork panel	H=4000mm	m2
2	suspending scaffold		set
3	Diagonal bracing		set
4	threaded rod	D15	m2
5	Flynt	D15	Pc
6	Shim block	D20	Pc
7	Shaft Platform Beam	2.1-2.7m	set
8	Anchor cone (Climing cone)	M30/D20	Pc
9	bolt	M30X80	Pc
10	Mold Releasing agent		Litre
11	plate,steel pipe,Guardrail
12	Screw and nut	M16X120	set
13	Expension bolt	M12X60	set