Beijing Yunhai Construction Hardware Co.,Ltd: Zibo, Shandong, China; Main products: Climbing Formwork

Home > Products > Climbing Formwork > PJ240 Light Weight Flexible Climbing Formworks for Concrete Pouring of Piers

PJ240 Light Weight Flexible Climbing Formworks for Concrete Pouring of Piers

FOB Price

Negotiable / Piece

1 Piece(Min. Order)

Payment TermsT/T L/C D/P D/A
Delivery Detail7 days

Request Sample Customized Request Request Free Catalogs

Contact Now

Get lowest price

Product Details

Brand Name	Yunhai		Place of Origin	China
Model Number	PJ200 & PJ240

Product Description

Delivery Time:5-28days
Certification:CE,ISO,FCC

PJ240 light weight flexible Climbing Formworks for concrete pouring of piers 1. PJ200 & PJ240 Climbing Formwork
2. suitable for dam, high building ( 100 meters high)
3. can stick to the concrete tightly

Product Name:Climbing Formwork

Introduction:

The cantilever climbing formwork PJ200 & PJ240 are widely used in concrete pouring of piers, high-rise buildings, and a variety of other structures.
The concrete lateral pressure is entirely supported by anchor system and the wall-through tie-rods. Therefore, additional reinforcement is not needed. The construction is easy, rapid and economical, and the surface of the concrete is slick.
The biggest advantage of PJ series is light in weight and convenient in use. The operation platform width of PJ200 and PJ240 is 200cm and 240cm respectively.

The Characteristics

The formwork unit can move backwards up to 600mm.
The formwork is flexible to adjust from all directions.
The inclination can be adjusted by pull-push prop and is up to 18°.
Reasonable structure and light weight.
High level of universality and standardization for connection components.

Structure Sketch

PJ200 PJ240

The Concrete Pouring Process

The first pouring
Before pouring, fix the anchor system on the plywood by M30 position bolt or construction bolt. Reinforce the formwork by wall- through tie rods.

The second pouring(the first lift)
Climbing brackets are used in the second pouring. Fix the anchor shoe in the bowl-climbing cone by tensile bolt, hang the bracket on the anchor shoe, and then insert the safe pin.

The third pouring(the second lift)
Fix suspended platform under the climbing bracket. Workers can remove the tensile bolt, anchor shoe and bowl-climbing cone for reusing, and then fill the holes left by bowl-climbing cone. This pouring process is the standard pouring; the later lifting process is the same, till the concrete pouring is finished.

1	formwork panel	H=4000mm	m2
2	suspending scaffold		set
3	Diagonal bracing		set
4	threaded rod	D15	m2
5	Flynt	D15	Pc
6	Shim block	D20	Pc
7	Shaft Platform Beam	2.1-2.7m	set
8	Anchor cone (Climing cone)	M30/D20	Pc
9	bolt	M30X80	Pc
10	Mold Releasing agent		Litre
11	plate,steel pipe,Guardrail
12	Screw and nut	M16X120	set
13	Expension bolt	M12X60	set

Contact Us

Beijing Yunhai Construction Hardware Co.,Ltd: Contact nameMr wang
Chat Now; Phone86-10-5214688; AddressNo. 449, Wucao Road, Qingfang Apparel Park,Tongzhou, Zibo, Shandong

*Email
Please enter Your valid email address.
*To

Mr wang
*Message
Your inquiry content must be between 20 to 5000 characters.
Please enter a correct verification code.

Product Categories

Climbing Formwork	Concrete Column Formwork	Concrete Wall Formwork	Frame Formwork
Self Climbing Formwork	Slab Formwork	Table Formwork

PJ240 Light Weight Flexible Climbing Formworks for Concrete Pouring of Piers

You May Like

Product Details

Product Description

Contact Us

Product Categories

New Products

Popular Searches

Recommended Products

Find Similar Products By Category