Contact Platform Support
Help CenterQPMX-50 Steel Rail Auto-climbing Formwork With One Oil Cylinder Unit Can Lift 50KN
Related Products
-
Pull-push Prop Type Automatic Climbing Formwork for Dam, High BuildingNegotiableMOQ: 1 Piece -
High Safety Hydraulic Climbing Formwork System With High Loading CapacityNegotiableMOQ: 1 Unit
-
DXB-180 / DXB-240 Suspending Scaffold Self Climbing Formwork System for Single-sided WallsNegotiableMOQ: 1 Piece
-
Steel Galvanized Cantilever Dams, Piers Climbing Formwork for Retaining Wall / Cooling TowerNegotiableMOQ: 1 Square Meter
-
PJ240 Light Weight Flexible Climbing Formworks for Concrete Pouring of PiersNegotiableMOQ: 1 Piece
Certification:CE,ISO,FCC
2. suitable for dam, high building ( 100 meters high)
3. One oil cylinder unit can lift 50KN
Introduction :
The lifting power of the Formwork QPMX-50 comes from its hydraulic system, which includes the oil cylinder and commutator. Through functioning of hydraulic system, the steel rail and bracket can climb up alternately, so the whole formwork system climbs steadily, independent of a crane. It\' s easy to operate, and climbing is fast and safe.
The Characteristics
1. One oil cylinder unit can lift 50KN.
2. The QPMX-50 system can climb not only vertically but also slantwise, and the forward or backward inclination can be up to 18 degrees.
3. The system can climb up wholly or separately. The climbing process is steady, synchronous and safe.
4 .The bracket does not come back to the ground until construction work is finished, and spacing for work is reduced while the bumping damage is almost completely prevented, especially for the plywood.
5.The error of structure construction is tiny and easy to correct.
6.The formwork can climb up by itself and cleaning work can be done in situ. The number of crane lifts are greatly reduced.
Standard Climbing Process
1.Set up the formwork by wall-through tie-rods and pull-push props, embed anchors and do the first concrete pouring.
2. Remove the formwork after the first pouring and fix anchor shoes on the finished wall, lift the brackets and formwork to the right position, match the formwork and do the second pouring.
3.Lift formwork and brackets to the higher floor; fix climbing rail and hydraulic system.
4.Match the formwork to the right position and do the third pouring.
5.Strip the formwork and fix anchor shoes on the finished wall, then let the climbing rails climb.
6. Brackets climb up to the right position, then install suspended platform.
7.Match the formwork, do the concrete pouring, and proceed into the standard climbing stage.
Illustration of Verticle Climbing
Sketches of inclined climbing
| 1 | formwork panel | H=4000mm | m2 |
| 2 | suspending scaffold | set | |
| 3 | Diagonal bracing | set | |
| 4 | threaded rod | D15 | m2 |
| 5 | Flynt | D15 | Pc |
| 6 | Shim block | D20 | Pc |
| 7 | Shaft Platform Beam | 2.1-2.7m | set |
| 8 | Anchor cone (Climing cone) | M30/D20 | Pc |
| 9 | bolt | M30X80 | Pc |
| 10 | Mold Releasing agent | Litre | |
| 11 | plate,steel pipe,Guardrail | ||
| 12 | Screw and nut | M16X120 | set |
| 13 | Expension bolt | M12X60 | set |
Send Inquiry to This Supplier
You May Also Like
-
Portable Toilet, Baño Móvil, Portable WC, Portable Restroom, Movable Toilet, Temporary ToiletNegotiableMOQ: 5 Sets
-
Bath Stool Bathroom Chair ToiletUS$ 4.5 - 29MOQ: 50 Pieces
-
Rotomolding Plastic Portable Toilet Manufacturer ,OEM ServiceNegotiableMOQ: 100 Units
-
600ml Toilet PowerNegotiableMOQ: 10000 Pieces
-
380V 50Hz Customized 10.5m Aluminum Alloy Temporary Suspended Platform ZLP1000NegotiableMOQ: 1 Piece
-
Sanitary Ware-Toilet Ware & Water TankUS$ 8 - 10MOQ: 1 Piece
-
New Kids Mini Closestool Products Buying Company for Canton FairUS$ 1 - 50MOQ: 1 Cubic Meter
-
Stainless Steel Bathroom or WC Thumb Turn IndicatorNegotiableMOQ: 1000 Pieces
-
Yutong Bus ToiletUS$ 2,800 - 3,500MOQ: 1 Set
-
Dual-Flush Upper Ultra-thin Cistern Plastic Toilet Squat Pan CisternUS$ 10 - 11MOQ: 8 Sets
