Custom Cold Steel Construction Slab Tunnel Peri Column Climbing Formwork System

Custom cold steel construction slab tunnel peri column climbing formwork system

escopic steel formwork
nstruction slab formwork system
ncrete formwork support
4.doka,plastic,aluminium,h20wood

Introduction

We are manufacturer specialized in scaffolding&formwork materials. Our best-selling products are slab formwork system(Patent No:ZL200420091863.6). It\'s adjustable system, very time-saving and labor-saving.

They replaced timbers,steel pipe&couplers.Wasting of timbers and couplers can be avoided. Moreover,this system can quicken construction period and improve quality of concrete casting.

1, Material

It is made of high pure cold steel ,it’s thickness is 2 to 2.5 milimeter ,the characteristics of this kind of new material is corrosion endurable ,the flexibility is big, firm , hard to be deformed .

2,Specification 

Main-Beam The main beam can adjust length within the scope of 1.17m to 4.39m at will, the short spine is used in balcony tolite and so on .

B-1 2.68m to 4.39m

B-2 2.28m to 3.68m

B-3 1.77m to 2.88m

B-4 1.17m to 1.78m                                                                                                                                                  

Sub Beam The sub beam has 3 normal sizes,its length as below:.

1.15m

0.80m

0.40m

3,Bearing Capacity:

Its supporting pole can put up 3-4 ton ,and the zone between two main beams can bear 2-2.5 ton , and every sub-beam can bear 1 ton . Now the general thickness of the concrete paddled currently is 10-15 centimeters ,and the weight in the same area is 100-150kg at most, so the supporting strength is enough for all buildings

4,Production characters :

  No.1 : the narrow flexible connection of keel is not only simple to manipulate but also firm and steady.

  No.2 : the telescopic keel can be regulateed at your will

  No.3: the smart locket connection between vertical and keel is simple and firm .

  No.4 : the horizontal pole is light and firm ,the smart fastener is unique

  No.5: compared with wooden grider ,it is much preciser and firmer

  No.6: it can make the construction site neat and clean ,so it helps to enhance the image of the corporation and demonstrate the strength of the corporation .

  No.7: time-saving , material-saving , laber-saving, dependable safety.

  No.8: free timber ,it can be reused and help to save energy resource and construction cost .so it is useful for environmental proection .

5,Advantage :

   No.1 : high efficiency , free any technique ,it is easy to operate and raise the work efficiency by 600%,(400 square meters can been finished within eight ours by four people )

   No.2 : free material , free a nail wire timber tool ,so it can reduce cost and save much timber .

   No.3: dependable safety , pure steel structure ,firm structure accessory firm connection safety.

   No.4 : clean neat construction site, easy to manage ,helpful to enhance the project image and firmness.

6,Comparision to old scaffolding system :

Old system:  Nowadays, pipe & couplers together with timbers are normally used as a shoring structure for concrete casting. This system is complex to operate, and takes much labors and time .It also needs many timbers, iron wire, nails to fix. These all caused a low efficiency and a high cost and material-wasting.

7. product range

scaffolding system,steel scaffold parts and couplers, formwork system, scaffold frame, scaffold props,shuttering materials, base jack, plywood supporting,post shore,  shoring props, steel pipe,galvanized scaffold plank,formwork accessories

No matter it is for buying new scaffolding, scaffolding parts, or for scaffolding rental, used scaffolding, or scaffolding for sale, you\'d find our products beneficial  and profitable for your business. Their high quality and low costing are the key factors to success.