Contact Platform Support
Help Center
Related Products
-
Anaerobic Flange SealantNegotiableMOQ: 100 Kilograms -
Anaerobic ThreadlockerNegotiableMOQ: 100 Kilograms
-
1ml Blue Medium Strength ThreadlockerUS$ 0.3 - 1MOQ: 900 Pieces
-
1ml Red High Strength ThreadlockerUS$ 0.3 - 1MOQ: 900 Pieces
-
Cactus Juice Alternative Wood Stabilizing ResinNegotiableMOQ: 200 Kilograms
LK603 ( loctite 603 equivalent )
fast cure, high strength, for bonding of cylindrical parts(gap around 0.13mm) where consistently clean surfaces cannot be assured.
LK609 ( loctite 609 equivalent )
high strength, this adhesive is suitable for match of transition, over-rigidity or gap filling(gap around 0.1mm).
LK620 ( loctite 620 equivalent )
after cure withstand high temperature(230°C), high strength, used in injection movement sets, valve covers,cylinder liner, keyway and so on. It is suitable for bonding of cylindrical parts with gap diameter around 0.12mm.
LK638 ( loctite 638 equivalent )
high strength, used to match and hold gap around 0.25mm. It is suitable for status of kineticenergy loading or cyclic loading.
LK641 ( loctite 641 equivalent )
medium strength, slow curing, used for assemble bearings. Recommended gap diameter is below 0.10mm.
LK648 ( loctite 648 equivalent )
high strength, used in continuous temperature up to 150℃ and gap diameter below 0.10mm.
LK660 ( loctite 660 equivalent )
high strength and high viscosity(like paste), this adhesive is mainly used for repairing, especially for press-fit parts such as bearings, keyway andend cover. It can fill gap diameter up to 0.50mm.
LK680 ( loctite 680 equivalent )
high strength and medium viscosity, this adhesive is used for gap match or excessiveness. It is suitable for pulleys, bushings, gears, rotor andso on. It can repair the hole, shaft fitting parts and parts with error. For steel it can bear 23N/Mpa of shear strength after full strength. It applies to gap around 0.25mm.
Send Inquiry to This Supplier
You May Also Like
-
STICK FAST Replacement Wood StabilizerNegotiableMOQ: 200 Kilograms
-
Anaerobic Screw Threadlocking AdhesiveNegotiableMOQ: 100 Kilograms
-
Anaerobic Thread Locker AdhesiveNegotiableMOQ: 100 Kilograms
-
Screw Thread Locking Pre-applied AdhesiveNegotiableMOQ: 100 Kilograms
-
Cyanoacrylate Instant AdhesiveNegotiableMOQ: 50 Kilograms
-
Vacuum Pressure Impregnating SealantNegotiableMOQ: 200 Kilograms
-
Industrial Epoxy Metal Repair PuttyNegotiableMOQ: 100 Kilograms
-
Anaerobic Pipe SealantNegotiableMOQ: 100 Kilograms
-
New 50ml Loctiter 641 648 680 Retaining Compound Bearing Hold Sealing Glue 680 Cylindrical Part AdhesiveNegotiableMOQ: 1
-
Anaerobic Retaining CompoundNegotiableMOQ: 100 Kilograms
