220V AC Servo Motor Controller Drive for Lifting Machinery
Certification:CE
220V AC Servo motor controller Drive for Lifting Machinery
Ac servo drive:
1, Design for heavy load equipment
2, Strong capability of over load
3, Quick response
4, Easy control, low price
Application
1. Block Machine
2. Brick-Making Machine
3. Building Materials Equipment
4. Metal Packaging Machinery
5. Air Compressor
6. Hydraulic Machinery
7. Lifting Machinery
Advantages
1. The S3 ac servo drive can meet the demand of step-less speed-changing of the main driving system used in numerical controlling machine tool.
2. Small size, require less space in the control cabinet
3. The method of vector control is better than that of V/F control, especially under slow speed torque. At 5 Hz frequency, the start torque can reach the ratio of 150%
4. The carrier wave frequency range: 0 ~ 16K Hz, work mutely
5. Provide standard analog quantity interface of 0 ~10 V (input impedance:47K Ω, output impedance:250KΩ). Compatible with most system interface of numerical controlling machine tool.
6. With strong capability of over load, the inverter can work more than one minute under the rated output current of 150%.
7. Provide multifunctional output terminal signals, such as zero speed signal, running signal, full speed signal, failure indication, etc.
8. Automatic torque compensation, make the spindle of the machine tool work normally at low-speed
9. Provide three groups of record for the maintainer to grasp the running situation of the machine tool. The parameter of the motor can regulate automatically to assure the precise and stability of the system.
Power range:
Provide all range of capacity from 0.75kw to 315kw;
Specification sheet
|
Power source |
One phase or three phase AC220V -50~+20% 50/60Hz Three phase AC220V -15~+10% 50/60Hz |
|
|
Suitable environment |
Temperature |
Using: 0~ 55 Storage: -20~ 80 |
|
Humidity |
Below 90% RH No dewing |
|
|
Vibration |
Below 0.5G(4.9m/s2)10 ~60 no continue running |
|
|
Control mode |
1. Position control 2. Speed control 3. The speed tries to move 4. JGO movement |
|
|
Regenerative applies the brake |
In sets |
|
|
Control characteristic |
Speed frequency response |
<400HZ |
|
Speed undulation rate |
±0.3 (load 0 ~ 100%); <±0.02 (power source -15 +10%) (value corresponds to rated speed) |
|
|
Velocity modulation ratio |
1:5000 |
|
|
pulse frequency |
<=600kHz |
|
|
Control input |
1. Servo enables 2. warning elimination 3. Deviation counter nulling operation 4. Instruction pulse prohlibition |
|
|
Control output |
1. servo prepares the output enables 2. servo warning output 3. the localization completes the output |
|
|
Position control |
Input way |
1. pulse+ mark 2. CCW pulse/CW pulse |
|
Electronic gear ratio |
1~32767 |
|
|
Feedback Pulse |
The most 20000 pulse / revolution |
|
|
Adds and subtracts the fast function |
The parameter establishment adds and subtracts the fast time 6-1530ms(0r/min ~1000r/min) |
|
Send Inquiry to This Supplier
You May Also Like
-
Actived Charcoal Filter CylinderNegotiableMOQ: 20 Sets
-
5L Hospital ECG Medical Ultrasound Coupling GelUS$ 0.1 - 1.1MOQ: 1 Carton
-
Animal Ultrasonic Detection Sets for Cow, Horse, Pets Etc. Palm ScannerNegotiableMOQ: 1 Set
-
U Fence Staples for Wooden Posts - 1.5 Inch Leg Length, Hot-Dip Galvanized, China FactoryNegotiableMOQ: 5 Tons
-
99 Cent Store Stationary China Product Cheap Plastic GlobeUS$ 0.05 - 0.3MOQ: 200 Pieces
-
High Quality Disposable Wooden Custom Medical Tongue Spatula DepressorUS$ 18 - 28MOQ: 10 Cartons
-
Needle Punched Qdsanhong and EVA Material Car Floor MatsUS$ 8.65 - 15MOQ: 1000 Pieces
-
Mini Coil With ROHS GEM008US$ 0.5 - 0.8MOQ: 1000 Pieces
-
Safety HammerUS$ 0.65 - 4.5MOQ: 1000 Pieces
-
YSSY-500 High Performance Low Price Hospital Medical Infusion PumpNegotiableMOQ: 1 Set