Contact Platform Support
Help CenterSell,1.2714,L6,tool Steel,die Steel,mould Steel,special Steel,alloy Steel Bars,forged Steel,hotwork,coldwork
Related Products
-
Sell,A10,tool Steel,die Steel,special Steel,mould Steel,alloy Steel Bars,steel Bars,forged Steel,forged Steel Bars,hotwork,coldworkNegotiableMOQ: 5 Pieces -
Sell,A6.tool Steel,die Steel,special Steel,mould Steel,alloy Steel Bars,forged Steel,hotwork,coldwork,steel Bars,NegotiableMOQ: 5 Pieces
-
Sell,A8,tool Steel,die Steel,mould Steel,special Steel,alloy Steel Bars,forged Steel,hotwork,coldwork Steel,steel,annealedNegotiableMOQ: 5 Pieces
-
Sell,D7,Cr12Mo1V4,tool Steel,die Steel,mould Steel,special Steel,alloy Steel Bars,forged Steel,steel Bars,hotwork,coldwork,annealedNegotiableMOQ: 5 Pieces
-
Sell,O6,tool Steel,die Steel,mould Steel,special Steel,forged Steel,alloy Steel Bars,steel Bars,hotwork,coldwork,annealedNegotiableMOQ: 5 Pieces
Product:1.2714,L6
Key words:tool steel,die steel,specialty steel,steel bar,hotwork,coldwork,forged bar,alloy tool steel,flat bar, round bar,
Typical Analysis:
C : 0.65-0.75
Si : 0.10-0.50
Mn: 0.25-0.80
P : Max 0.030
S : Max 0.030
Cr: 0.60-1.20
Mo: Max 0.50
Ni: 1.25-2.00
Similar Grades:DIN 1.2714, GB/T 5CrNiMo
Advantages:
Good toughness at lower hardness lever.
Good wear at high hardness lever.
Application:
L6 was designed for general purpose tools where greater toughness is required, such as forming rolls, punches, blanking dies, shear blades,and spindles.
Machinability:
L6 has a machinability rating of 85% of a 1% carbon tool steel.
Annealing:
L6 should be annealed at 1400°F and held for one hour per inch of thickness. Cool at 20°F per hour to 900°F and then air-cool. A maximum hardness of 217 Brinell should be obtained.
Hardening:
L6 should be preheated to 1200°F then heated to 1500°to 1550°F and held for one hour per inch of thickness. Quench in oil to 150°F followed immediately by tempering. L6 can also be air quenched in sections less than 1" thick.
Send Inquiry to This Supplier
You May Also Like
-
Ship PlateNegotiableMOQ: 5 Metric Tons
-
Galvanized Roofing Sheet 0.16/0.17/0.18*900/800*2440/3000 Bwg30 Bwg32 Roofing TilesNegotiableMOQ: 1 Ton
-
Guide Plate Steel Wear Plate Guide Strip High Strength Abrasion Resistant Plate Wear Strip BOLIUS$ 9.5 - 10MOQ: 1 Piece
-
Cut to Length Alloy 36 Steel Plate UNS K93603 Invar 36 Corrosion ResistingNegotiableMOQ: 10 Kilograms
-
High Hardness Hardfacing Wear Steel Plate Bimetallic Welding Alloy Steel PlateNegotiableMOQ: 1 Square Meter
-
Vessel PlateNegotiableMOQ: 5 Metric Tons
-
Alloy Steel PlateNegotiableMOQ: 5 Metric Tons
-
Mild Steel PlateNegotiableMOQ: 5 Metric Tons
-
Steel Sheet & Plate- AH36 - DH36 - EH36NegotiableMOQ: 5 Metric Tons
-
Steel Sheet & Plate/ASTM A36/S235JRNegotiableMOQ: 5 Metric Tons
