Contact Platform Support
Help CenterSell,1.2080,D3,XW-5,tool Steel,die Steel,mould Steel,special Steel,alloy Steel Bars,steel Bars,steel
Related Products
-
Sell,1.2343,H11,SKD6.tool Steel,die Steel,mould Steel,special Steel,alloy Steel Bars,steel BarsNegotiableMOQ: 5 Pieces -
Sell,1.2344,H13,SKD61,tool Steel,die Steel,mould Steel,special Steel,alloy Steel Bars,steel Bars,forged Steel,hotwork,coldwork,forged Tool SteelNegotiableMOQ: 5 Pieces
-
Sell,D2,1.2379,XW-41,SKD10,tool Steel,die Steel,mould Steel,special Steel,alloy Steel Bars,steel Bars,steel,forged Steel,hotwork,coldwork,forged Tool SteelNegotiableMOQ: 5 Pieces
-
Sell,O-1,1.2510,tool Steel,die Steel,mould Steel,special Steel,alloy Steel Bars,forged Steel,steel Bars,forged Tool Steel,coldwork,hotworkNegotiableMOQ: 5 Pieces
-
Sell,1.2550,tool Steel,die Steel,mould Steel,special Steel,forged Steel,alloy Steel Bars,steel,forged Tool SteelNegotiableMOQ: 5 Pieces
Product:1.2080,D3,XW-5,
Keywords:tool,steel, die steel, alloy tool steel, hotwork steel, coldwork steel, round bar, flat bar, forging steel, mould steel,
Typical Analysis:
C : 2.00-2.35
Si: 0.10-0.60
Mn: 0.10-0.60
P : Max 0.030
S : Max 0.030
Cr: 11.0-13.5
Similar Grades: DIN 1.2080, GB/T Cr12
Avantages:
Extremely high wear resistance.
Very high compressive strength.
Availability:
Limited.
Application:
Used in specialized applications such as draw dies, forming rolls, powder metal tooling and lamination dies.
Machinability:
Altough readily machinable in the annealed condition D3 has a lower rating than most other tool steels. It is rated at 45% of a 1% carbon tool steel. D3 has a low grindability rating.
Annealing:
D3 should be surface protected during annealing and slowly heated to 1600°to 1650°F. Hold at temperature for one hour per inch of thickness. Furnace cool to 1000°F, and then cool in still air.
Send Inquiry to This Supplier
You May Also Like
-
Ship PlateNegotiableMOQ: 5 Metric Tons
-
Premium PPGI Z120 Z150 Corrugated Roofing Sheets for Durable Construction With Large StockNegotiableMOQ: 1 Ton
-
Sliding Guide Block Cover Oil Free Graphite Plugged Pads Slide Plates Bronze Wear Plates BOLIUS$ 9.5 - 10MOQ: 1 Piece
-
Cut to Length Alloy 36 Steel Plate UNS K93603 Invar 36 Corrosion ResistingNegotiableMOQ: 10 Kilograms
-
High Quality Chromium Carbide Overlay Hardfacing Wear Plate LinerNegotiableMOQ: 1 Square Meter
-
Vessel PlateNegotiableMOQ: 5 Metric Tons
-
Alloy Steel PlateNegotiableMOQ: 5 Metric Tons
-
Mild Steel PlateNegotiableMOQ: 5 Metric Tons
-
Steel Sheet & Plate- AH36 - DH36 - EH36NegotiableMOQ: 5 Metric Tons
-
Steel Sheet & Plate/ASTM A36/S235JRNegotiableMOQ: 5 Metric Tons
