Semi-automatic PET Bottle Blow Molding Machine(filling Machine)

Semi automatic bottle blow molding machine
PET Bottle Blowing Molding Machine(Moulding Machine)

Specification: YD series semi automatic bottle blow molding machine is suitable for producing PET plastic containers and bottles from 10to 2000ml.

It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle etc.
Adopting double crank to adjust mould, heavy locking mould, stable and fast, Adopt infrared oven to heat the perform, the perform rotated and heated equally.
The air system has been divided into two parts: Pneumatic action part and bottle blow part to meet the different requirements for the action and blow. It can provide sufficient and steady high pressure for blowing large irregular shaped bottles.
The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine.
The machine can be operated in the step by step mode and the semi-auto mode.
The machine is small with low investment, easy and safe to operate.

Max. Volume of moulded product: 2000ml
Max. Product capacity: 1000-1200PCS/H
Max. Heating power: 14kw
Pressure of air supply: 2.5mpa
Max. Mould dimension: 20*35* 38cm
Max. Shifting mould dimension: 17cm
Center distance between two bottles: Min 9cm max 20cm
Max. Stretched length: 35cm
Weight: 650kg
Size Mainmachinine: 160*60* 161cm
Oven: 187*63* 145cm