China Manufacturing IEC60335 Ball Pressure Apparatus
Ball pressure test apparatus
The ball pressure test apparatus is designed according to IEC60695-10-2, IEC60335, IEC60601, GB4706.1 and etc. the surface of the part to be tested is placed in the horizontal position and a steel ball of 5 mm diameter is pressed against the surface with a force of 20 N. The test is performed in a heating cabinet at a temperature of 75°C ± 2°C. The ball is withdrawn after 1 h and the diameter of the impression made by the ball is measured. An impression greater than 2 mm in diameter constitutes a failure.
Parameters:
1. Ball diameter: 5mm (R2.5mm)
2. Test Pressure: 20N±0.2N
3. Material: Stainless Steel
Send Inquiry to This Supplier
You May Also Like
-
IEC60598-1 Tumbling Barrel TesterNegotiableMOQ: 1 Piece
-
IEC60884 Tumbling Barrel Drop Testing MachineNegotiableMOQ: 1 Piece
-
Mobile Electrical Parts BS1363.1 Figure 20 Tumbling Barrel Rolling Drop Test MachineNegotiableMOQ: 1 Piece
-
Vacuum Cleaners IEC61032 Tumbling Barrel Testing MachineNegotiableMOQ: 1 Piece
-
IEC60529 IPX1 and IPX2 Drip Box Water Resistance Testing MachineUS$ 5000 - 6000MOQ: 1 Piece
-
IEC60529 IPX3 and IPX4 Waterproof Testing Machine With R1200 Oscillating TubeUS$ 6000 - 7000MOQ: 1 Piece
-
IEC60529 IPX5 and IPX6 Waterproof Test Rig With Φ6.3mm and Φ12.5mm Jet NozzlesUS$ 6000 - 7000MOQ: 1 Piece
-
IPX7 Temporary Immersion Tank According to IEC60529US$ 4000 - 5000MOQ: 1 Piece
-
IEC60529 Dust and Sand Chamber for IP5X and IP6X TestingUS$ 6000 - 6000MOQ: 1 Piece
-
Temperature and Humidity Test ChamberUS$ 4000 - 4000MOQ: 1 Piece