Mobile Electrical Parts BS1363.1 Figure 20 Tumbling Barrel Rolling Drop Test Machine
Plug BS1363.1 Figure 20 Tumbling barrel rolling drop test machine
1. Introduction
The TB series tumbling barrel test machine meets the requirements of GB2099.1-2008 clause 24.2, GB2423.8, GB7000, GB13140, VDE0620, IEC68-2-32, BS1363.1, EN50075, UL60730 and etc., tumbling barrel test machine is applied to evaluate the fall resistance performance, the fall times can be preset and auto shut down when finished.
2. Parameter
Model:TB-3
Roll speed: 5rpm
Fall speed: 10 times/min
Material: Back-front: transparent plastic plate; Up-down: 10-19mm thick plywood
Test times: 0-9999 times
Fall height: 650mm
No. of tumbling barrel: Single or double
Application: BS plug and socket
Compliance standard: BS1363.1 figure 20, UL60730
Power: 220V 50HZ 150V 60Hz
Send Inquiry to This Supplier
You May Also Like
-
IEC60529 Dust and Sand Chamber for IP5X and IP6X TestingUS$ 6000 - 6000MOQ: 1 Piece
-
Temperature and Humidity Test ChamberUS$ 4000 - 4000MOQ: 1 Piece
-
IEC60529 Dustproof Test Chamber for IP5X and IP6X TestingUS$ 4000 - 4000MOQ: 1 Piece
-
IEC60529 IPX3/4 Hand-held Spray NozzleUS$ 750 - 750MOQ: 1 Piece
-
IEC60529 Portable IPX5/6 Jet NozzleUS$ 530 - 530MOQ: 1 Piece
-
IEC60529 Portable IPX5/6 Jet NozzleUS$ 530 - 530MOQ: 1 Piece
-
IPX1 and IPX2 Vertical Water Drip Box Conforms to IEC60529 (Box Type)US$ 5000 - 8000MOQ: 1 Set
-
IEC60529 Vertical Raining Drip Box for IPX1 and IPX2 Testing (wall Mounting Type)US$ 5000 - 8000MOQ: 1 Set
-
IPX9K High Temperature and High Pressure Jet Spray Test Chamber for Auto PartsUS$ 15000 - 20000MOQ: 1 Set
-
JIS D0203 R1/R2/S1/S2 Spray and Jet Proof Test Equipment for Auto PartsUS$ 10000 - 15000MOQ: 1 Set