Hot sale!! Dezhou Huili enamel coated bolted steel water storage tanks

Enamel Coated Bolted steel tanks  

Keywords to understand Huili water tank

SMC/FRP/GRP water tank

Stainless steel water tank

Enameled water tank

Hot dip galvanizing water tank      

gush-paint water tank

BDF/CSB underground water tank 

All of the water tank can add thermal insulation layer

Product Description   

Material:The panel is carbon steel sheet made by ramming craft;

The size of the panel is: 1000*1000mm,1000*500mm, 500*500mm.

The thickness of the panel mainly includes: 5mm, 4.5mm, 3mm, 2.5mm, 2mm, 1.5mm. It is different according to the tank dimension. 

Flanges: The sectional panels shall be pressed to double flanges at the angles of 45 degree and 90 degree to the face of the plate on four sides.

Reinforcement Method: All tanks are internally braced with angle stays to endure the rigidity of the tank when filled with the water. The Top panel is supported by top panel support, which shall be made of hot-dipped galvanized material.

 Application 

•Storage and regulation of living water supply & construction water supply.

•Various industries, civil water supply, HVAC, firefighting, food, beverage, vintage, water  

  treatment, medicine, petroleum, chemical and so on. 

•Taking flexible, reasonable plate design, suitable for all sizes combined water tank.Suitable for living water with PH value:6.5-8.5, using life:≥20 years

Advantages

1. It is not easy to deformation;Strong vibration resistance;Resistance to impact large

2. Enamel water tank is cleaning and hygiene,Ensure no pollution to water quality

3. Composite plate assembly at the scene.Convenient, quick and flexible and adaptable

4. Acid and alkali resistance, corrosion resistance

5. No leaking , sealed performance is good.

6. Storage of hot water is better than other water tank .

7. Enamel water tank level off is smooth, easy to clean.  

 Selection and using

1.Supply your water tank sizes ,the position of connective pipes and pipe diameter.

2.The water tank can be supplied with the whole sets.

3.Use water storage temperature for 4-65°c.

4.Without other  weldments inside and outside the tank,avoiding destroying the enamel surface.

5. The tank should be cleaned regularly ,When testing the water to prevent debris into the box
6.Take over the position of the seams on the board, the company shall be adjusted,pipe

   diameter is constant.

Installation and test

1. The water inlet pipe and outlet pipe and overflow pipe diameter, location.

2. The channel around the water tank shall be not less than 600 mm, and the box at the bottom       and the top is no less than 500 mm.

3.Water injection test, close the outlet pipe and drain pipe, open the inlet pipe, full, after 24 

   hours don't ooze water is qualified.

Tank insulation

Insulation material: polyurethane

Thickness: 30mm, 50mm, 80mm, 100mm

Outer coating material: color steel, galvanized steel, SUS201, SUS304