iFOAM Laboratory Foam Bitumen make apparatus

The iFOAM Laboratory Foam Bitumen Plant is designed to be professional equipment as a true representation of “Asphalt Foaming”, a professional-grade equipment for indoor study of foamed asphalt.

iFOAM supported use of the mixer can be used for cold mix materials, but also for hot mix(warm mix) materials.

The patented foamed bitumen generator, core component of iFOAM has a function of secondary foaming, the rationary design makes the mixing of asphalt and water more evenly, so as to the asphalt foaming process more fully and foaming effect more better. In addition, an increase of some regulatory function is used to optimize the foaming properties of asphalt.

iFoam asphalt tank comes with an agitator, to ensure consistent temperature of asphalt tank from top to bottom.

iFoam asphalt tank ergonomic height above ground makes the dumping asphalt work more convenient and safe.

All iFoam bitumen pipes have heat insulation function, to avoid clogging the asphalt, eliminating lines clean.

Foamed bitumen is formed by adding a small amount of water in the hot asphalt, when water is injected in hot asphalt, the water would quickly evaporate, thereby causing the asphalt saturated vapour bubbles produce an explosion in volume inflated to 15-20times. Foam asphalt increased volume and surface-active signifi cantly, during the foaming process, significantly, and thus the asphalt to be able to fully spread the galvanizer.

When using foamed bitumen as a stabilizer, by adding a small amount of cement to make recycling mixture layer not only can obtain the necessary strength of the structure, but also can improve the surface quality and prevent crack formation.

This technology is mainly used for overhaul of roading paving.

This machine formed by bitumen heating cylinders, bitumen pipeline heating system, water cooling pipe system, tank, nozzle bodies, temperature meters, pressure gauges,relays, water flow meter and other components.

Specifications:

Water consumption: Min: 2.5L/Hour; Max: 6.0L/Hour

Air consumption: Min: 0L/Hour; Max: 100L/Hour

Max bitumen pump pressure: 2.5Mpa

Max water pressure: 0.6Mpa

Air pressure: Min: 140Mpa; Max: 170Mpa

Water Temperature: Min: 10°C;Max: 60°C

Bitumen tank volume: 12.5L

Power supply voltage: 220V

Water tank volume: 6L;Air chamber Volume: 6L

Rated power Bitumen pump: 1.5kW;Heaters: 3.2kW;Control: 0.1kW

Bitumen pump speed: Min: 1Hz;Max: 60Hz

Power supply voltage: 220V

Asphalt foam spraying time can be set: 0.1-999S

Dimension (lengthxwidthx height):1261x670x1200mm

LM30 Laboratroy mixer for the production of cold mixes, A perfect match for the Laboratory Foam Bitumen Plant