FI-5 Proportional Caliper
STANDARD: ASTM D4791
1. Characteristic
a. Used for the rapid and easy determination of percentage of flat particles, elongated particles, or both in coarse aggregate fractions of 9.5mm (3/8 in) or larger.
b. It consists of 6'' x 16'' (152.4 x 406.4mm) base plate with four rubber feet, two fixed posts and a 13in (330mm) pivoting arm.
c. The positioning of the pivoting arm allows to obtain desired ratio among 1:2, 1:3, 1:4, or 1:5.
d. Weight: 3.2kg.
Our products are 100% supplied from the factory
If you are interested in our products, you can contact us directly or welcome to visit our site:
SKYPE ID: sun.nancy3


Send Inquiry to This Supplier
You May Also Like
-
DTM-2 Deval Attrition Testing MachineNegotiableMOQ: 1 Set
-
PSV-2 Skid Resistance & Friction Tester (Skid Tester)NegotiableMOQ: 1 Set
-
PSV-1 Accelerated Polishing MachineNegotiableMOQ: 1 Set
-
ACV-1 Aggregare Curing Value ApparatusNegotiableMOQ: 1 Set
-
TFV-1 Ten-percent Fines Value ApparatusNegotiableMOQ: 1 Set
-
RB-2 Riffle Boxes /Sample Splitters(enclosed Type)NegotiableMOQ: 1 Set
-
JC60 Jaw CrusherNegotiableMOQ: 1 Set
-
Fine Aggregate Sand Equivalent Test ApparatusNegotiableMOQ: 1 Set
-
Stainless Steel Mesh Basket Aggregate Soundness TesterNegotiableMOQ: 1 Set
-
Aggregate Freezing and Thawing Resistance TesterNegotiableMOQ: 1 Set







