FX1020 Glazed Wall Panel Machine for 1020mm Width Tile

                                     FX1020 glazed wall panel machine for 1020mm width tile

>>Company Information

 We are special in roll forming machine for nearly 20 years, with high quality and competitive price in China.

Our company covers an area of 30,000 square meters, including separated workshop for glazed roll forming machine, sandwich panel roll forming machine, C/Z purlin roll forming machine and Plastic coated workshop etc. the showcase workshop with our products open  also is waiting for your coming.

our products are popular in Russia, India, UK, USA, Kazakhstan, Tajikstan ,Malaysia, Nigeria, Rumania and Albania etc. more than 50 countries and region with acclaim.

 glazed wall panel machine

• Easy operate with high production capacity
• Carriage with hardened gear or chain
• Magnetic linear encoder for direct measuring 
• Precision length and width control 

 1.Technical parameters :

2.Details show:

a. Feeding and decoiling

b. Forming

c. Embossing and Cutting

d. Runout table and Spare parts

3.Note for use and maintenance

Glazed tile roll forming machine 

A.Notes:

1),before use,you must check whether all connections are steady,whether  bolts and nuts are tightinstallation.when start the machine,you must make sure there are enough lubrication oil in the case.

2),when start the machine commissioning,the machine should run idle,then check it carefully such as noise,vibration and whether the oil window works smoothly,whether every parts movement coordination.

3),You must cut off power when install the mould,move the motor belt and big gear by hand,turn the workbench and make sure the slide up to the highest point.