Contact Platform Support
Help CenterDesiccant Air Dryer
Related Products
Specifications
Compressed Air DryerDesiccant Dryer
Air Dryer
Compressed Air Dryer
Desiccant Dryer
Air Dryer
Desiccant dryers are also known as Regenerative Desiccant Dryers and Twin Tower Dryers.
The compressed air is passed through a pressure vessel filled with an absorbent
media such as activated alumina, silica gel, molecular sieve or other desiccant
material. The desiccant adsorbs the moisture in its millions of pores, trapping
it. The desiccant can bring the dew point of water vapor in the compressed air
down to -40 degrees C or below.
The lubricant entrained in the
compressed air from a standard rotary screw compressor is 2~3 ppm. GSA POM
series heatless desiccant air dryers reduce the lubricant entrained in the
compressed air to 0.01 ppm.
Features & Benefits
- Reduce the lubricant entrained in the compressed air to 0.01 ppm
- Flow range of 35-3991 scfm (1-113 m3/min.)
- 6~10 minute cycle (5 minutes online and 3~5 minutes regenerating)
- Tower pressure relief valves.
- Purge adjustment valve to control purge flow.
- Purge exhaust mufflers for quiet operation.
- Tower pressure gauges
- Adjustable (5&10 min.) microprocessor sequence module.
- Controlled repressurization
- Fail-safe design : failure of power and/or pilot air causes the purge
exhaust valves to close
- Desiccant fill and drain ports for ease of desiccant replacement
- Tower operating status lights
- ON/OFF switch and power ON light
- Standard designs deliver -40 degrees C pressure dew point
- -70 degrees C pressure dew point option available
- Dew point monitor, optional
- Pre-piped filters and by-pass valve packages, optional
Custom
designs and electrical configurations, optional
The lubricant entrained in the compressed air from a standard rotary screw compressor is 2~3 ppm. GSA POM series heatless desiccant air dryers reduce the lubricant entrained in the compressed air to 0.01 ppm.
Features & Benefits
- Reduce the lubricant entrained in the compressed air to 0.01 ppm
- Flow range of 35-3991 scfm (1-113 m3/min.)
- 6~10 minute cycle (5 minutes online and 3~5 minutes regenerating)
- Tower pressure relief valves.
- Purge adjustment valve to control purge flow.
- Purge exhaust mufflers for quiet operation.
- Tower pressure gauges
- Adjustable (5&10 min.) microprocessor sequence module.
- Controlled repressurization
- Fail-safe design : failure of power and/or pilot air causes the purge exhaust valves to close
- Desiccant fill and drain ports for ease of desiccant replacement
- Tower operating status lights
- ON/OFF switch and power ON light
- Standard designs deliver -40 degrees C pressure dew point
- -70 degrees C pressure dew point option available
- Dew point monitor, optional
- Pre-piped filters and by-pass valve packages, optional
Custom designs and electrical configurations, optional
Send Inquiry to This Supplier
You May Also Like
-
Negative Weighing BoothNegotiableMOQ: 1 Set
-
Ozone Generator Appliance for Water TreatmentUS$ 500 - 7000MOQ: 1 Set
-
Handheld Metal Stainless Steel Laser 3 in 1 Welding Cleaning Machine 1000w Laser Welding MachineNegotiableMOQ: 1 Set
-
Wholesale New Design High Pressure Foot Gun Dump Style Cleaning Equipment PartsUS$ 260.00 - 280.00MOQ: 1 Piece
-
Brass Thermal Release Valve G1/4\" or NPT3/8\" Male Thread Pressure Washer Plunger Pump Thermal Relief Valve Thermal ProtectionNegotiableMOQ: 1
-
Blast Pot Cccessories Boron Carbide NozzleUS$ 40 - 60MOQ: 10 Pieces
-
Class 10000 Clean Room Partitions DesignNegotiableMOQ: 500 Square Meters
-
Hot Sale Printer Parts Cleaning/ Printhead Washing MachineUS$ 3,700 - 5,000MOQ: 1 Set
-
Wash-Drain Switch for Washing MachineNegotiableMOQ: 1000 Pieces
-
Engineer Control Machining Centers, High Quality CNC Plastic PartsUS$ 0.1 - 1MOQ: 1 Piece
