The most valuable wood chips carbonization furnace for sale

Specifications

wood chips carbonization furnace
fessional design 2.airflow type,environment friendly 3.long service life 4.high capacity

The most valuable wood chips carbonization furnace for sale

 

Introduction of wood chips carbonization furnace

• Carbonizing is also know as dry distillation, this is a process of turning solid fuel into charcoal in a thermal chemical process.
• In this process solid fuel, such as wood, coal are decomposed into gas(coal gas), liquid(tar oil), and solidity(charcoal/coke). The final tar oil and gas are overflow from the charring stove(can recycle)and the charcoal should remove by manual labor out the stove.

1.Wood chips carbonization furnace in high carbonization rate and high output charcoal.

 

2.Energy saving,1000 kg charcoal only need 30kg firewood or 15kg liquid gs for heating the carbonization furnace.

 

3.Smokeless, For our carbonization furnace have little pollution, because our wood chips  carbonization furnace have purification tank and 95% smoke will be reuse for heating the stove again.

 

4.The wood chips carbonization furnace is easy loading and unloading. we will also send you some steel basket for you to loading and keep good look for the final charcoal.

 

 

Advantages of wood chips carbonization furnace

 

1. High carbonization rate ,no smoking ,little pollution,high efficiency

 

2. Newly developed carbonization kiln,which can dry the materials with the superfluous energy produced in the charring process.6-8 hours per stove and can work continuiously

 

3. The tube of fume extraction will recycle the gas-flow which come from  the carbon basket during the charring process for continue warming the stove ,and it will save 70% energy consumption and recycle 95% smoking

 

How does carbonization stove make charcoal?

                                                             

The surface of wood (bamboo, wood briquette, nut shell, etc) will ignite spontaneously in the hypoxic condition. And this spontaneous combustion will produce heat. This heat and the external heat source will heat the stove at the same time, when the temperature reach 280 degree, the chemical structure of the wood will be changed by the hightemperature, and after long time heating, changing and decomposing, then we will get the black charcoal, combustible gas, and wood tar.   

 

The inputting of wood briquettes	1. Open the cover of the furnace  2. Drop the circular stove out of the furnace, and lay it at certain region for inputting briquettes..  3. Open the cover of circular stove (inner pot) , and tilt it for inputting coconut shell  4. When finish the inputting of coconut shell, cover the circular stove, and put it into the carbonization furnace, then lay some fine sand along the circular stove for insulation.  5. Open the three outlet flue, and cover the furnace, along the roof of which lay some fine sand for insulation, and begin the process of carbonization.
Carbonization process	Make fire, begin the process of carbonization according to the technology.
The ending of carbonization process	At the ending of this process, stop carbonization by regulating the chimney valve.
Insulation and cooling	Open the cover of furnace, and block the outlet flue of circular furnace, sealing it with fine sand, and getting the circular furnace out for cooling.
Carbonizing circularly	Input another circular stove (inner pot) with briquettes beginning the second circulation of carbonization according the above way and technology.
Out getting of charcoal	When the charcoal is cool down, open the cover of circular furnace for out getting

 

 

Technical parameters

 

Carbonization stove	Size(m)	Volume(m³)	Capacity	Power(kw)	Temperature in the stove(°C)
THL-A	2.2*1.8*2.2	3	0.8-1ton/24hrs	1.5	420-480
THL-B	2.4*1.8*2.2	5	1.5-2ton/24hrs	1.5	420-480
THL-C	3.0*2.0*2.2	6	2-2.5ton/hrs	1.5	420-480

 

 

Why choose us?

 

1. Earliest manufacturers of the charcoal making machine with 20 years experience, 

2. largest manufacturers of the charcoal making machine in China, ( 100000m2, 80 workers)

3. All the machine get the ISO, CE ,SGS, BV certificate

4. We have one production line test Centre near our factory 

5. Test the machine for the client for free( if you need to know whether the machine can be used for your raw material, you can send the raw material and we can test for you for free)

6. Timely delivery

7.Good After-sale service team, and the team include one sales manager, one engineer, one quality

 

Technology and innovation are our eternal pursuit. “High quality, competitive price, best service, timely delivery” is our philosophy, and we hope to fully cooperate with overseas partners on the basis of equality and mutual benefits. We sincerely hope to become your Chinese supplier and partner in the mechanical field.

 

Work shop

 

 

 

Service for customers

 

1. Pre-sale service: according to your special needs, design and manufacture products for you, provide you with project design, process design, purchase program.

 

2. On sale: accompany you to check the performance of the machine.

 

3. After-sale service: we will send engineers to install the equipments to put them into use as soon as possible, commissioning and training operators on site.

 

 

Contact Information
If there is anything i can do for you, pls feel free to contact me. Amy is always at your service.
Your Success Is Our Business! Hope to have the honor to cooperate with you in the bright future.