12V Car Power Transfer 19V24V15V Laptop DC-DC Step-up DC-DC Boost Module Power Converter

Product Name: 12V car power transfer 19V24V15V Laptop DC-DC step-up DC-DC Boost module power converter
Product Type: FULREE B1635
Color classification:
Product details: Module Properties: non-isolated boost module (BOOST)
Input voltage: 10-32V
Output voltage: continuously adjustable (12-35V)
Output Current: 10A (MAX)
Input Current: 16A (MAX) (more than 10A, please enhance heat dissipation,)
Output power: natural cooling 100W (MAX), enhance heat dissipation 150W (MAX) the actual power
Easy to drive 65W 90W dual-core notebooks include
Laptop with a 12V battery module temperature with ordinary 19V 3.42A of about 45 degrees
Conversion efficiency: 94% (input 16V output 19V 2.5A when measured) (for reference only)
Output Ripple: 2% (MAX) 20M bandwidth
Operating temperature: Industrial grade (-40 ℃ to + 85 ℃) (ambient temperature exceeds 40 degrees, lower power use, or to enhance heat dissipation)
Full temperature: 45 ℃
No-load current: Typical 25mA
Voltage Regulation: ± 0.5%
Dynamic response speed: 5% 200uS
Short circuit protection: None (Please enter the installation of fuses or circuit protection)
Input reverse polarity protection: no, you can enter the series diode.
Connection: solderless terminal

Wiring: the above chart, .IN + input positive, IN- input negative, OUT + Output +, OUT- output negative.

Volume Specifications:

65 (L) * 47 (W) * 23.5 (H) mm

Note:
1. Within one meter lead wire length not less than 1.5 square feet, if greater than 1 m length wire, bold, recommended 2.5 to 4 square feet of line is better
2. The module operates at high power, high temperature, plus time to install the fan housing, low power without adding a fan, be sure the module heat sink temperature should not exceed 80 degrees.
3. Using the input can not be reversed output can not be shorted.
4.12V battery discharge voltage can not be lower than 10.5V, Li-ion battery used in tandem (single 3.7V) discharge voltage can not be lower than 2.7V.

Applications:

1.DIY an output adjustable vehicle power supply, only need to enter access your 12V power supply, the output voltage you can (14-35V) on freedom of continuous adjustment, but the output voltage can not be lower than the input voltage, oh.

2. Universal car laptop power supply. Input connector on your 12V power supply, the output voltage is adjusted to your notebook to work.

3. Boost charger, you can use the 12V power supply is higher than 12V battery charging, such as 24V battery.

4. The power supply for your electronic device, as long as the voltage is adjusted to the voltage you need and the current does not exceed the rated current is able to work properly.

4) pre-supply system, when you do a project when the time 10-18V input, and your system board 24V power they need about its great power, with ordinary DC-DC power module too small, then you choose this module we will be your best choice, no debugging directly on the machine can work easily achieve efficient high-power boost