Best Mining Machine Sand Washer

Introduction of Sand Washer:

1. Sand Washer is a kind of water washing equipment to be matched with the sand making machine.

2. This series XSD Sand Washer is a kind of water washing style equipment to be matched with the sand making machine and can reduce the dust and stone powder which mixes with the final sand, so sand making machine can improve the quality of the sand.

3. XSD series Sand washer is used in building plant, quarry, concrete plant, dam building, casting-70 sand, glass factorys quartz sand and refilling pressure sand.

Characteristics of Sand Washer:

The sand washer has its own advantages of reasonable structure, large capacity, low consumption, little loss of the sand during the washing process, low failure rate.

Application of Sand Washer:

1. Sand washer is used to remove dust in the sand. It aims to improve the quality of the sand. Materials include the gravel required for the construction of the site, gravel plants, Central hydroelectric and dam concrete positions and electrical plant pole, casting-70 sand, quartz sand plant of glass and sand filling pressure.

2. Sand washer is widely used for cleaning of materials in the following industries: quarry, minerals, building materials, transportation, chemical industry, conservation of water and hydroelectric energy, cement mixing station and so on.

Working Principle of Sand Washer:

1. The electric motor runs slowly with the impellor after decelerated by the belt, decelerator and gears wheel.

2. The sand and stone flow into washing launder from feeding launder, rolls with the impellor, and grinds each other.

3. The impurity covering the sand is washing away. At the same time, add more water, the strong water flow will take away waste and some low-weight wastes from washing launder.

4. Through the above process, the washing function is finished.

5. The clean sand and stone is lift up by vane. When it goes up slowly, the water begins to drop through the mesh and fall back in the washing launder.

6. On one hand, water is removed from the sand and stone; on the other hand, the water can be fully used.

7. Finally, the sand and stone goes to the out launder from the rotary impellor to finish the washing task.

Main Technical Parameter of Sand Washer: