Hot selling foam agent for Cellular Lightweight Block

1 .  Introduction

Cellular lightweight concrete foaming agent namely the foaming agent for foamed concrete. It is able to reduce the liquid surface tension, and produce a lot of homogeneous and stable foam to produce the admixtures of foamed concrete.

2.  Property                   

LD cellular lightweight concrete foaming agent  is produced by our company cooperating with domestic and foreign experts cooperating with our company by using of the new synthesis, which is the synthesis of polymer materials, non-toxic, tasteless and the PH value closes to neutral. It belongs to a green environment protection material without corrosive to cement and metal and the biodegradation degree above 90%. The high foam expansion, foam stability, the foamed concrete produced no blast bubble, no loose bubble, and the amount and foaming effect are equal to imported plant foaming agent. So, it is the ideal cement foaming agent in the foamed concrete engineering such as the roof insulation heat preservation to find slope, thermal flooring, cast-in-situ wall and so on. LD effective foaming agent with high stability of the bubble capsule shows strong three-dimensional tension and specific tenacity, supporting the foam cement slurry before final set to keep porosity types without bubble and falling when transported by high-pressure pump to the top. 

3. Main Features:

• Strong dispersion, no cluster, flocculation, shrinkage, exudation and sink phenomenon in producing foam concrete. 
• Good stability, thickening property, early strength, foam concrete hole stability, no sink, no collapse, and no shrinkage.
• Good foaming ability, forming the cement solid foam concrete when reacted with cement, low bibulous rate, independent closed hole, no water absorption and storage.

4. Products indicators:

5. Scope of USES: 

The high effective foam agent produced by our company has a widely using. It is a new and ideal building material in this modern time with many functions on itself such as heat insulation, cold, leakproof, shockproof, insulation, gap filling, and thermal insulation and so on. And it has high foaming quantity, high porosity, good flexibility, high bonding strength, environmental protection and energy saving, as well as convenient construction. 

6. Main equipment of cellular concrete machine:

The specific production process of foam concrete machine:

1. Feeding and blend: The quantitative cement, foam agent, steady bubble enhancer is added intothe mixer, through feeding system will be quantitative strengthening agent, foaming agent, stabilizing bubble cement mixer with 30 seconds by dry blend.

2. Mixing: quantitative warm water be added into the mixer with 2 minutes by wet mixing; The quantitative foaming agent be added into the mixer with 8 to 15 seconds mixing.

3. Inject into the mold and foaming: this material be placed into the mould immediately to foaming with 3-5 minutes.

4. Preliminary maintenance: this process is done by several standing after injection moulding.

5. Demoulding: the foam concrete board can be demould is after initial set, which have the initialstrength.

6. Cutting: this foamed concrete board blank owning a certain intensity can be cut after demoulding, and the cutting specifications can be adjusted according to the need by the cutting blade;

7. Finish product maintenance: the curing time of foam concrete board should have no less than 7 days.

Our customer will get a one-stop service:

Pre-sales service: Customers are guided to choose the best applicable products and provided the technology-advanced, energy-saving and practical process. We are responsible for the local planning and design.

Middle-sales Service: Customers are welcome visit our factory for the spot simulation test and propose advices according to contract. We are pleasure to accept them.

After-sales service: Customers are available to get the technology support, including the installation, debugging and operation-training.

Lead Equipment Co., Ltd (LEC) is a leading and well-known manufacturer of Concrete Foam Machine, A few of employees have been working in designing and selling above machines for about twenty years, and they can provide their customers/clients with sincerely, friendly, timely technical consultation, technical support and after-sale service.