High Efficiency End Suction Centrifugal Pumps
Performance Table
| The Specification of ISO Series End Suction Centrifugal Pump | |
| Discharge Size | DN32-200mm |
| Head | 2-160m |
| Flow Rate | 4-1600m3/h |
| Medium Temperature | -15--80℃(standard) 80--145℃(on special request) |
| Working Pressure | ≤1.6MPa(standard) ≤2.4MPa(on special request) |
| Application | • Water supply and drainage • HVAC and Cooling Tower • Fire Protection and Fire Fighting • Marine – Ballasting & Bilge • Booster and Pressurization Set • Irrigation and agriculture • Water supply and drainage |
| Pump Parts | Material |
| Pump Casing | Cast Iron; Stainless Steel 304/316/316L |
| Impeller | Cast Iron; Bronze; Stainless Steel 304/316/316L |
| Shaft | Stainless Steel; Chrome Steel |
| Shaft Sleeve | Stainless Steel |
| Casing Ring | Grey Cast Iron; Bronze |
Performance Curve
Features:
1. The Centrifugal pump adopts back pull-out structure, there is no need to disassemble the pump during maintenance, this structure is also lightweight, so it is easy to replace the spare parts.
2. Due to the separate design for the bearing and the mechanical seal, the bearing can keep in its original position even when the mechanical seal leaks or needs replacement. This provides the bearing with an extended service life, and ensure less maintenance of the pump.
3. Our centrifugal pump can be used as self-priming pump, when it is equipped with the self priming device,which can greatly reduce the cost and service power, speed up the self-priming time, at the same time it can support dry start.
DA Series End Suction Centrifugal Pumps (Long Coupling)
DAZ Series Centrifugal Pump (Short Coupling)
Contact Person: Devin Chen
Whatsapp: +86 13968717283
Wechat: 1124650298
Email: devin@
or you can directly send me inquiry with your requirement.
Send Inquiry to This Supplier
You May Also Like
-
Spot Danfoss Piston Pump JR-L-S75C-LS-21-25-NN-N3-S1NE-A2NNNN-JJ J-NNNNegotiableMOQ: 1 Piece
-
M, AH, HH Series Slurry PumpNegotiableMOQ: 1 Piece
-
Japan Komatsu PC200-8 PC210-8 PC220-8 Excavator 708-2L-31430 Hydraulic Main Pump 7082L31430US$ 4000 - 5000MOQ: 1 Unit
-
Automatic Pressure Control Water Pump for Irrigation SystemsUS$ 80000000000 - 100000000000000000MOQ: 1000 Tons
-
Rexroth PGF1-21/1.7RA01VP1 Type Hydraulic Internal Gear PumpUS$ 120.36 - 229.87MOQ: 1 Set
-
Innovative CMO GHIBLI FOOT PUMP Industrial Solutions for Enhanced PerformanceNegotiableMOQ: 1 Set
-
Manufacturer Direct Selling Fluorine Lined Strong Acid and Alkali Resistant Pump IHF Series Fluorine Plastic Alloy Chemical Centrifugal PumpUS$ 150 - 1600MOQ: 10 Pieces
-
Sand Pumping PumpUS$ 410 - 700MOQ: 1 Piece
-
Micro Machining Precision Casting Water Pump Spare PartsUS$ 1 - 30MOQ: 500 Pieces
-
Parts Of Breast PumpUS$ 1,000 - 1,100MOQ: 2 Tons






